MESA ™ Safety Guide & Assembly Instructions Sally Zone Salty Zone #e | 2 Call Toll Free We're Here To HAP! Customer Service: Monday Friday, 8:00 C.8.T.
SAFETY Follow the instructions provided, do not alter its design in any way, « Construction requires at least two adults capable of heavy lifting » This predict is intended for single-family residential use only, by children ages two 1o ten and a maxim urn wait of 105 pounds, Any recommendation aver 10 years of age or 105 pounds exceeds the upper meets specified In the American Society for Testing and Materials (MAST) Home Playground Beatty Standard, In order for Play Star {o comply with the MAST Standard,
VI SAFETY INSTALLATION: 1. Follow the instructions provided, do not alter fts design in any way, 2. Only one child, for each single planned seat or single planned activity should be allowed on this set at one time, with a maim um weight of 108 pounds for 2. Place the equipment on level ground, ach child, ot less than & (18] hom any SIUCI® e Tanning: You must teach children the or obstruction such A8 A fonts, 931308, winging: house, overhanging branches, laundry A "ot to walk close to, in front of, behind.
= n Lumber Notes: » Boards are marked with nominal 2" thick boards will be rifled {14} 1"x4"x 217" dimensions. during assembly process using drill marking template. » Actual size may vary. » Assembly is easier if boards are stacked « Always use any per-drilled 1o by marked size before beginning. boards as the drill template to drill 1" into second board before » During assembly process, hide the securing with hardware or screws.
I B E #2,3 con Glossary Place tower or component in desired location. Mark board with template using pattern shown on this step. M Note: DO NOT drill through template. Drift through board at correct location with countersink tool and bit size shown. Drift down the depth shown info board at correct locations using bit size shown. Note: You may use any bracket as a drill template. Mark board with measurement shown for location on this step.
B Safety Warning Glossary ! CAUTION: These boards should be per-drilled and countersunk fo avoid cracking. Note: Adjust countersink tool to width of first board fo countersink to proper depth. P re-driil into second board using first board as a template before attaching. CAUTION: Ground must be level. Installation on a hill or incline will create unsafe conditions,
Make sure boards remain square, Note: Assembly process should take place on flat surface. This helps with assembly process, Do into Be sure boards are flush, Be sure boards/brackets are tight against each other. Be sure boards/components are spaced the distance listed. Be sure to squally space. Be sure boards rest on the ground. Play star Logo showing: Use tabs 1o square on corner of board. Arrow showing: Use tabs to slide along edge S of board to drill location.
Bronze Skip fo aped 26) Silver & Gold Design Options Only A Dissuades 281 e @ ¥ you do not have saw horses, rest beam on the ground.
Swings and Rings Adjustment Zone NOTE: Customize the height of your chain in the Adjustment Zone to it your child, Play Handles Safety Plaque () #8 x Place on Swing Beam or in prominent location on Splayfeet.
i Removed I‘ #3 in step Fill in around bottom of slide to make surface level to surrounding grade.
IMPORTANT ~ PLEASE READ Thank You for choosing Play Star. Because it is our intention to make this & positive family experience, we have taken great cars in preparing this product. All boards have been properly dried, thoroughly inspected for quality and dimension ally correct prior to packaging. Occasionally a piece of lumber may develop a slight twist or bow due to changing humidity levels during transportation or storage.