Instructions / Assembly

19
STEP 1: R
emove the top ³⁄₈" x 4"
hex bolt, washers and lock nut from the
post support as shown. (Save these parts
because they will be used in Step 3
.)
Install the Sturdy-Frame Brace as
shown and secure with ³⁄₈" x 4¹⁄₂" hex bolt,
washers and lock nut.
Make sure brace is square to beam. Using
the brace as a template, drill a ³⁄₈" hole
completely through beam.
Note: It is easiest to remove this bolt
by continuing to rotate in a
counterclockwise direction.
Drill
³⁄₈" x 4¹⁄₂"
hex bolt
³⁄₈" x 4"
hex bolt
STURDY-FRAME BRACE INSTALLATION
Secure the Sturdy-Frame Brace to the
beam with the ³⁄₈" x 4" hex bolt, washers
and lock nut removed in Step 1.
Repeat Step 1 through Step 3 for second
A-Frame Assembly.
³⁄₈
" x
4
"
he
x bol
t
Items for STEP 2:
(1) Sturdy-Frame Brace
(1) 4¹₂" hex bolt
(2) ³₈" washers
(1) ³₈" lock nut
Items for STEP 3:
(1) 4" hex bolt
(2) ³₈" washers
(1) ³₈" lock nut
}
Removed
on Step 1
TURN TO PAGE 26 FOR
ANCHORING INSTALLATION