Technical Specifications

ManualsBrandsPlayStar ManualsOutdoorsMonkey Ring Kit

Building Instructions

Shown With Components

(Purchase Separately):

(1) Climbing Rope (PS 7828)

(1 set) Climbing Rocks (PS 7830)

PS 7744

(2) 4" x 4" x 8'

(3) 2" x 6" x 8'

(1) 5/4" x 6" x 10'

(2) 5/4" x 6" x 8'

(5) 2" x 4" x 8'

(140) #8 x 2¹₂" Deck Screws

Call Toll Free 1-888-752-9782

Customer Service: Monday - Friday, 8:00 A.M. to 5:00 P.M. C.S.T.

We’re Here To Help!

Play Action

Important!

Intended for residential use by children ages 2 to 10, only

on properly installed PlayStar playsets. Before use refer to

complete safety guidelines in your original playset, at

www.playstarinc.com, or at 1-888-752-9782.

Warning!

Only one child, for each single planned seat or single

planned activity should be allowed on this set at one time,

with a maximum weight of 105 pounds for each child.

Lumber and Screw

Requirements

Your tower may be different than shown. When adding to a PlayStar

Playset, follow the instructions included in your original building kit.

Summary of content (6 pages)

PAGE 1
Play Action® Building Instructions Shown With Components (Purchase Separately): (1) Climbing Rope (PS 7828) (1 set) Climbing Rocks (PS 7830) Your tower may be different than shown. When adding to a PlayStar Playset, follow the instructions included in your original building kit. Important! Intended for residential use by children ages 2 to 10, only on properly installed PlayStar playsets. Before use refer to complete safety guidelines in your original playset, at www.playstarinc.
PAGE 2
CONTENTS TOOLS REQUIRED Monkey Ring Kit contains: Socket Wrench ⁷ ₁₆" & ⁹ ₁₆" Socket Adjustable Wrench Ladder Tape Measure Safety Glasses Drill (6) Monkey Rings (6) Chains (6) Monkey Ring Hangers (6) Quick Links Weather-resistant hardware Square Phillips Screwdriver Saw Hammer ¹ ₈" & ¹ ₄" Drill Bit Pencil HARDWARE INCLUDED (shown actual size) ³|₈" x 3" Lag Screw (14) ¹|₄" x 1¹|₂" Lag Screw (12) ³|₈" Washer (14) MONKEY RING CUTTING GUIDE MEASURE, MARK, AND IDENTIFY ALL LUMBER BEFORE CUTTING.
PAGE 3
BUILDING INSTRUCTIONS Before starting to build your Play Action Set, make sure all boards are cut and identified by size and name. 61/2" 16" Fig. 1 2" x 6" 2" x x 96 6" " x 93 " 16" 1. Attach one 2" x 6" x 96" beam cap to one 2" x 6" x 93" beam at dimensions shown. Secure with eight #8 x 2¹ ₂" deck screws equally spaced. (Fig.1) 16" 93" Note: The beam cap must overhang both ends a minimum of 1¹ ₂" and both sides approximately 2". (Fig.1) 16" 16" 2.
PAGE 4
5. Flip the step assembly over and attach one 2" x 4" x 28¹ ₂" step at dimension shown. Be sure step is square with 4" x 4" posts. Secure step with eight #8 x 2¹ ₂" deck screws. (Fig. 3) 6. Attach one 2" x 6" x 28¹ ₂" top support flush with top edge and outside of 4" x 4" posts. Be sure top support is square with 4" x 4" posts. Secure support with eight #8 x 2¹ ₂" deck screws and two ³ ₈" x 3" lag screws with washers. (Fig.
PAGE 5
A PlayStar Tower shown. Your Tower may be different. 10. Install one top header (2" x 6" x your tower width) flush with top and outside of 4" x 4" posts. The top header must be 8' as shown. Secure with eight #8 x 2¹ ₂" deck screws and two ³ ₈" x 3" lag screws with washers. (Fig. 5) B B 11. Position monkey ring support approximately eight feet from tower opening. Install beam assembly in the center of tower opening and monkey ring support.
PAGE 6
Thank You for choosing PlayStar. Because it is our intention to make this a positive family experience, we have taken great care in preparing this product. Should you have any questions, or if we can assist you in any way, please call our friendly Customer Service Department. Please call us Toll Free at 1-888-PLAYSTAR (752-9782) Monday through Friday, 8:00 A.M. to 5:00 P. M. C.S.T. Ask for Customer Service.