Instructions / Assembly

10
Attach the sides using ⁵₁₆" x ³₄" hex bolts,
⁵₁₆" washers and ⁵₁₆" lock nuts on each side
as shown.
Tighten firmly but do not over tighten.
2"
x
4
" x 2
4
¹⁄₄
"
2"
x
4
" x 2
4
¹⁄₄
"
On a flat work surface place the 2" x 4" x 24¹₄"
boards to form an “L” as shown. Make sure the
ends are flush on both sides.
Drill an ¹₈" hole at locations shown. Secure with #8
x 2¹₂" deck screws.
Items for STEP 12:
(10) ⁵₁₆" x ³₄" hex bolts
(20) ⁵₁₆" washers
(10) ⁵₁₆" lock nuts
Items for STEP 13:
(2) 2" x 4" x 24¹₄" boards
(4) #8 x 2¹₂" deck screws
Note: The lumber referred to on this section
has been included in your PlayStar
Playset lumber requirements. Refer to
your original PlayStar Safety Guide
and Instructions for complete
cutting details.