Instructions / Assembly

13
Make sure the exit is level and making firm contact with the ground.
N
ote: If the exit is not making contact with the ground, it will be
necessary to remove earth under the lumber support until
exit firmly contacts the ground.
At locations shown screw Playset Anchors into ground by hand (a long
screwdriver will help).
Use the anchor mounting hole as a drill guide and drill a ¹₄" hole
1¹₂" deep into the boards. Attach with ³₈" x 2" lag screws and
³₈" washers provided.
Note: If soil conditions permit anchors to be pulled out
easily, such as in sandy soil conditions, cementing
is required. Anchors must be placed below the
level of shock-absorbing material to prevent
tripping or injury resulting from a fall.
Items for STEP 16:
(2) Anchors
(2) ³₈" x 2" lag screws
(2) ³₈" washers
Anchor
mounting hole