Instructions / Assembly

5
Attach the two entrance sections using
⁵₁₆" x ³₄" hex bolts, ⁵₁₆" washers and
⁵₁₆" lock nuts as shown.
Finger tighten only at this time.
Attach two 60° halves using ⁵₁₆" x ³₄" hex
bolts, ⁵₁₆" washers and ⁵₁₆" lock nuts as
shown.
Finger tighten only at this time.
Repeat this assembly five times.
Items for STEP 4:
(1) Left Entrance Section
(1) Right Entrance Section
(6) ⁵₁₆" x ³₄" hex bolts
(
12) ⁵₁₆" washers
(6) ⁵₁₆" lock nuts
Items for STEP 5:
(10) 60° halves
(35) ⁵₁₆" x ³₄" hex bolts
(70) ⁵₁₆" washers
(35) ⁵₁₆" lock nuts
Entrance Assembly
60º Tunnel Assembly