Instructions / Assembly

8
Attach the Exit using ⁵₁₆" x ³₄" hex bolts,
⁵₁₆" washers and ⁵₁₆" lock nuts as shown.
Finger tighten only at this time.
Items for STEP 10:
(1) Exit
(8) ⁵₁₆" x ³₄" hex bolts
(16) ⁵₁₆" washers
(
8) ⁵₁₆" lock nuts
At this time use a ¹/₂" socket and wrench to tighten all the nuts and
bolts that have been finger tightened in Steps 4 through 10
while making sure flanges are relatively flush with each other.
DO NOT OVER TIGHTEN!