User Guide

GETTING STARTED
ACTION CAMERA
ACCESSORIES
Waterproof
Case
Tripod
Mount
Bicycle Mount
Extension
USB
Charging
Cable
Surface
Mount
Camera
Clip
Handle Bar/
Pole Mount
Straps
FULLY CHARGE YOUR PLAYZOOM GOCAM
Connect the camera to a computer or USB power supply
A blue charging status light turns ON while battery is
charging (a full charge of 4 hours)
The charging status light will turn OFF when the
battery is fully charged.
INSERT MICRO SD MEMORY CARD (NOT INCLUDED)
(The camera is compatible with 8GB, 16GB, and 32GB
capacity microSD memory card)
POWER ON & GO
Turn GoCam ON by pressing and holding the
Power/Mode Button for 3 seconds.
Press the Power/Mode Button to cycle through camera
modes. Video Capture/Camera/Playback/Gallery/Setup
RECORDING VIDEO
Video Recording: Switch to video recording mode.
Press OK to start recording. Press “OK” again if
you want to stop video.
Photo shooting & Settings: Switch the camera to “Photo
shooting Mode”, Press “OK” button to take photos.
STORAGE & PLAYING
To view your photos and videos, use a USB cable to
export the videos onto a computer. You can also
remove the Micro SD card from the camera and insert it
into a computer with a card reader. View full manual for
detailed instructions.
Shutter/Select Button
Micro SD Slot
Microphone
Power/Mode Button
Status Indicator Light
Up Button
Down/Shutter Button
Speaker
Screen
Lens
Micro USB
Port