Installation Guide

Owner's Manual

Electric Wood Log Set Listed

120v AC / 60 HZ

L-20W 20" Natural Wood Log L-24W 24" Natural Wood Lo

PLEASE READ CAREFULLY BEFORE USING AND SAVE THIS MANUAL FOR

FUTURE REFERENCE.

SAFETY RULES & OPERATING INSTRUCTIONS:

1. This log set may be used in any wood-burning fireplace, wood stove, artificial fireplace, or

any other site that the user desires. Select a location that is in reach of a 120 Volt AC outlet.

2. Carefully unpack the log set. Read these instructions and keep this manual, as the parts

list may be required in the future.

3. Rotate the light switch clockwise for "ON" and "OFF" operation. Note: If lamp fails to light

when the unit is first turned on, check to see if the bulb has loosened in its socket during

shipping.

4. IMPORTANT! Unplug unit from electrical supply before attempting bulb

replacement or any other service work.

5. To replace light bulb, unplug the log set, carefully remove the old bulb, and replace with

a 40 watt (max.) red bulb.

CAUTION: To prevent electric shock, do not use this (polarized) plug with an

extension cord, receptacle, or other outlet, unless the blades can

be fully inserted to prevent blade exposure.

IMPORTANT: It is recommended that any service required on this unit be done

by a qualified technician.

PAGE 1
Owner's Manual Electric Wood Log Set 120v AC / 60 HZ L-20W 20" Natural Wood Log Listed L-24W 24" Natural Wood Log PLEASE READ CAREFULLY BEFORE USING AND SAVE THIS MANUAL FOR FUTURE REFERENCE. SAFETY RULES & OPERATING INSTRUCTIONS: 1. This log set may be used in any wood-burning fireplace, wood stove, artificial fireplace, or any other site that the user desires. Select a location that is in reach of a 120 Volt AC outlet. 2. Carefully unpack the log set.
PAGE 2
PARTS LIST NOTE: When ordering repair parts, always give the following information: Model number, part number(s), part description(s), and name(s) of item(s).
PAGE 3