Use and Care Guide

7
PREPARATION
PREPARATION
ASSEMBLY INSTRUCTIONS
1
1. The electric log set with heater (A) can be installed
in several ways, either  on

opening that meets the instructions and warnings
in this manual. Simply place the electric log set with
heater (A) in the desired location, observing the
clearances and notes in this manual, and plug the
cord into a minimum 15-amp, 120-volt electrical
outlet. Use an extension cord rated for a minimum
of 1,875 watts if necessary.
9.5 in.
(242) mm
18 in. (457 mm)
31 in. (788 mm)
A
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5 minutes
Tools Required for Assembly: Wrench (included), Phillips Screwdriver (not included)