Warranty
22
CARE AND MAINTENANCE
WARNING
FOR YOUR SAFETY
• Do NOT touch or move re pit for at least 45 minutes
after use.
To enjoy years of outstanding performance from your re pit, make sure you perform the following
maintenance activities on a regular basis:
Keep exterior surfaces clean.
1. Use warm soapy water for cleaning. Never use ammable or corrosive cleaning agents.
2. While cleaning your re pit, be sure to keep the area around the burner dry at all times. Do not
submerge the control valve assembly. If the gas control is submerged in water, do NOT use it.
It must be replaced.
a. Keep the appliance area clear and free from combustible materials, gasoline and other
ammable vapors and liquids.
b. Do not obstruct the ow of combustion and ventilation air.
c. Keep the ventilation opening(s) of the cylinder enclosure free and clear from debris.
3. Air ow must be unobstructed. Keep controls, burner, and circulating air passageways clean.
Signs of possible blockage include:
• Gas odor with extreme yellow tipping of ame.
• Fire pit does NOT reach the desired temperature.
• Fire pit glow is excessively uneven.
• Fire pit makes popping noises.
• Spiders and insects can nest in burner or orices. This dangerous condition can damage
re pit and render it unsafe for use. Clean burner holes by using a heavy-duty pipe cleaner.
Compressed air may help clear away smaller particles.
• Carbon deposits may create a re hazard. Clean dome and ignition screen with warm soapy
water if any carbon deposits develop.
4. Inspect the burner at intervals recommended by the manufacturer. The burner must be replaced
prior to the appliance being put into operation if it is evident that the burner is damaged. Only
use the replacement burner that is specied by the manufacturer
Note: In a salt-air environment (such as near an ocean), corrosion occurs more quickly than
normal. Frequently check for corroded areas and repair them promptly.