Instructions / Assembly

PREPARATION

ASSEMBLY INSTRUCTIONS

1. Set Base (D) upside down on a at, clean

surface. Attach one Foot (E) to Base (D) by

inserting four M6x10 Bolts (AA) through predrilled

holes in Feet (E) and into predrilled hole in corner

of Base (D) as illustrated.

Repeat using remaining Feet (E).

Tighten bolts at this time with a screwdriver.

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents above. If any part is missing or damaged, do not attempt to

assemble the product. Contact customer service for replacement parts.

Estimated Assembly Time: 25 minutes

Tools Required for Assembly: Phillips Screwdriver (Not Included)

Hardware Used

M6x10mm Bolt

x 16