Manualshelf

Installation Guide

ManualsBrandsPleasant Hearth ManualsHeating, Ventilation, and Air Conditioning2,200 sq. ft. Pellet Stove with 120 lb. Hopper and Auto Ignition
21222324252627282930
7077-171 • July 10, 2012
30
10
Appliance Set-Up
A. Outside Air Kit Instructions
CAUTION
Never draw outside combustion air from:
• Wall, oor or ceiling cavity
• “Enclosed space such as an attic, garage or
crawl space.
An outside air kit has been provide standard with the appli-
ance. It is highly recommended to use the outside air kit for
maximum performance and to reduce effects from negative
pressure in the home.
Follow the instructions included in the outside air kit. For
attachment to this platform, knock out the retangular plate
in the rear of the unit and slide the tube in the rear of the
unit. Using the hose clamp, attach the ex pipe to the 2” tube
welded to the rear of the rebox as shown in the photo.
Shock hazard.
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Route cord away from appliance.
•
Do NOT route cord under or in front of appli-
ance.
CAUTION
B. Power up the Unit
Plug the unit into 120VAC power.
WARNING
DISCONNECT SUPPLY
BEFORE SERVICING.