Assembly Instructions

INSTALLATION

BEFORE INSTALLING THE APPLIANCE

- Turn off gas supply to replace or rebox.

- Clean replace oor and chimney before installing log set. Seal any ash. Clean out doors to protect

the unit from down drafts.

MOUNTING PROCEDURE

- Place grate/burner assembly into rebox with the front pan facing forward.

- Drill two (2) 5/32" diameter holes approximately 1" deep.

- Anchor the front pan to the oor using the (2) Concrete Attachment Screws (Not Included)

(See Fig. 11.1).

- Proper installation of the grate is essential to prevent any movement of the gas logs and

controls during operation.

Fig. 11.1

Mark Location using Log Set

and drill hole in Floor of

Fireplace aprrox. 1" deep to

accept Concrete Screws.

(Both Sides)

3/4 Hex Head Flanged

Concrete Screw (Not Supplied)