Instructions / Assembly

ManualsBrandsPleasant Hearth ManualsGas Fireplace LogsVL-WO30D

VENTED NATURAL

GAS LOGS

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday or

email us at customerservice@ghpgroupinc.com.

- Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or

any other appliance.

- WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas supplier, call the re department.

- Installation and service must be performed by a qualied installer, service agency or

the gas supplier.

0418GL012S

Complies with ANSI Z21.84-

2012, Standard for Manually

lighted, Natural Gas Decorative

Gas Appliances for Installation in

Solid-Fuel Burning Fireplaces.

Complies with ANSI Z21.60-

2012, Standard for Decorative

Gas Appliances for Installation

in Solid-Fuel Burning Fireplaces

when the LP Conversion Kit

(SPK100) is installed by a

qualied technician.

80-10-232 - 2018-08-21

WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED

EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY

DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

CAUTION - FOR YOUR SAFETY

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

This is a gas-re appliance. It uses air (oxygen) from the room in which it is installed. Provisions

for adequate combustion and ventilation air must be provided. Refer to Air For Combustion and

Ventilation of page 7 of this manual.

This appliance is convertible for use with propane/LP gas by using the MANUAL ON/OFF

VALVE/SAFETY PILOT KIT (see ACCESSORIES on page 18).

VL-WO18D / VL-WO24D / VL-WO30D

VL-AA18D / VL-AA24D / VL-AA30D

VL-NO18D / VL-NO24D / VL-NO30D

VL-SA18D / VL-SA24D / VL-SA30D

VL-CA18D / VL-CA24D / VL-CA30D

MODELS

Summary of content (10 pages)

PAGE 1
VENTED NATURAL GAS LOGS MODELS VL-WO18D / VL-WO24D / VL-WO30D VL-AA18D / VL-AA24D / VL-AA30D VL-NO18D / VL-NO24D / VL-NO30D VL-SA18D / VL-SA24D / VL-SA30D VL-CA18D / VL-CA24D / VL-CA30D 0418GL012S Complies with ANSI Z21.842012, Standard for Manually lighted, Natural Gas Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces. Complies with ANSI Z21.
PAGE 2
PAGE 3
TABLE OF CONTENTS Specifications.................................................................................................................................... 2 Important Safety Information ............................................................................................................3 Product Identification......................................................................................................................... 5 Product Features............................................
PAGE 4
SAFETY INFORMATION IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, operate, or service this log set. Improper use of this log set can cause serious injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poisoning. Only a qualified installer, service agent, or local gas supplier may install and service this product. WARNING: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
PAGE 5
SAFETY INFORMATION 1. This appliance is only for use with the type of gas indicated on the rating plate. 2. Do not place propane/LP supply tank(s) inside any structure. Locate propane/LP supply tank(s) outdoors. 3. If you smell gas • shut off gas supply • do not try to light any appliance • do not touch any electrical switch; do not use any phone in your building • immediately call your gas supplier from a neighbor’s phone.
PAGE 6
PRODUCT IDENTIFICATION Cover Plate* Log Risers Pilot Bracket Screw (4) 8X3/8PPHTS-B Burner Manifold Burner Clamp* Grate Burner Pan *Uses (4) 8X3/8PPHTS-B Screws 5 Burner Inlet
PAGE 7
PRODUCT FEATURES The State of Massachusetts requires that the chimney flue damper, when used with decorative gas log sets, be welded open or completely removed. In the State of Massachusetts, this appliance must be installed by a licensed plumber or gasfitter. In the State of Massachusetts the gas cock must be a T-handle type. The State of Massachusetts requires that a flexible appliance connector cannot exceed three feet in length. LOCAL CODES Install and use log set with care. Follow all codes.
PAGE 8
ASSEMBLING LOGS VL-WO18D/VL-WO24D/VL-WO30D/VL-SA18D/VL-SA24D/VL-SA30D WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this log set may result in property damage or personal injury. CAUTION: After installation and periodically thereafter, check to ensure that no yellow flame comes in contact with any log. With the log set set to High, check to see if yellow flames contact any log.
PAGE 9
ASSEMBLING LOGS VL-AA18D/VL-NO18D/VL-CA18D WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this log set may result in property damage or personal injury. CAUTION: After installation and periodically thereafter, check to ensure that no yellow flame comes in contact with any log. With the log set set to High, check to see if yellow flames contact any log.
PAGE 10
ASSEMBLING LOGS VL-AA24D/VL-AA30D/VL-NO24D/VL-NO30D/VL-CA24D/VL-CA30D WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this log set may result in property damage or personal injury. CAUTION: After installation and periodically thereafter, check to ensure that no yellow flame comes in contact with any log. With the log set set to High, check to see if yellow flames contact any log.