Installation Guide

ManualsBrandsPleasant Hearth ManualsFireplace & Stove PartsFirebrick Panel Set for 32 in. Zero Clearance Ventless Dual Fuel Fireplace Insert

80-10-582 - 2018-12-06

DECORATIVE

BRICK PANEL

MODEL # ZRP320 / ZRP360 / ZRP420

TO BE USED WITH ALL PLEASANT HEARTH

UNIVERSAL FIREBOX MODELS

1. Set the LH Panel inside the rebox along the left interior wall.

The gas inlet cutouts should be on the bottom corner facing

toward the back wall and inward to the rebox, so that the brick

nish is viewable. Screw in one bracket above the LH panel in

the screw hole located on the left wall using one of the provided

screws. (Do not tighten).

2. Set the RH Panel inside the rebox along the right interior wall.

The gas inlet cutouts should be on the bottom corner facing

toward the back wall and inward to the rebox, so that the brick

nish is viewable. Screw in one bracket above the RH panel

in the screw hole located on the right wall using one of the

provided screws. (Do not tighten).

INSTALLATION OF DECORATIVE BRICK PANELS

8-18 Phil. Pan

3/8" B Screw

- BLACK

Brackets

Brick

Panels

x 3

Before installing Brick Panels to

ﬁrebox, please make sure you have

the following items:

If within one year from the date of original purchase, this item fails due to a defect in material or workmanship,

we will replace or repair at our option, free of charge. To order parts or to obtain warranty service,

call 1-877-447-4768, Monday - Friday, 8:30 a.m. - 4:30 p.m. CST. This warranty does not cover defects resulting

from improper or abnormal use, misuse, accident, or alteration. Failure to follow all instructions in the owner’s

manual will also void this warrranty. The manufacturer will not be liable for incidental or consequential damages,

or common erosion of outdoor products. Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation may not apply to you. This warranty gives you specic legal

rights, and you may also have other rights which vary from state to state.

WARRANTY

This product can expose you to chemicals including Benzene which is

known to the State of California to cause cancer and reproductive harm.

For more information go to www.p65Warnings.ca.gov

RH Panel

Center Panel

LH Panel

3. Set the Center Panel inside the rebox along the back interior wall facing outward so that the brick nish

is viewable. Screw in two brackets above the Center Panel in the screw holes located on the back interior

wall using two of the provided screws. (Do not tighten).

4. Adjust the LH, RH, and Center Panels so that their brick nishes are aligned and ush with one another,

then tighten all 4 screws.

If any part is missing or damaged, do not attempt to assemble the product. Contact our Technical Service

Department at 1-877-477-4768 for replacement parts.

Summary of content (2 pages)

PAGE 1
DECORATIVE BRICK PANEL MODEL # ZRP320 / ZRP360 / ZRP420 TO BE USED WITH ALL PLEASANT HEARTH UNIVERSAL FIREBOX MODELS Before installing Brick Panels to firebox, please make sure you have the following items: Brackets x4 8-18 Phil. Pan 3/8" B Screw - BLACK x4 Brick Panels x3 INSTALLATION OF DECORATIVE BRICK PANELS If any part is missing or damaged, do not attempt to assemble the product. Contact our Technical Service Department at 1-877-477-4768 for replacement parts. 1.
PAGE 2
PANELES DECORATIVOS DE LADRILLO MODELO # ZRP320 / ZRP360 / ZRP420 USAR CON TODOS MODELOS DE FIREBOX UNIVERSAL PLEASANT HEARTH Antes de instalar las paneles de ladrillo en la chimenea, asegúrese de tener los siguientes elementos: Escuadra x4 Tornillos 8-18 Phil. Pan 3/8" B - NEGRO x4 Paneles de ladrillo x3 INSTALACIÓN DE PANELES DECORATIVOS DE LADRILLO Si hace falta alguna pieza o se encuentra dañada, no intente ensamblar el producto.