EZ Flash 5 - Manual First, congratulations to your purchase of an EZ Flash 5! In this manual, EZ Flash V & EZ Flash 5 will hereafter be called EZ5. 1. What's inside the box? • 1 x EZ5 DS card 2.
You need a Micro-SD/TransFlash memory card and a computer with a compatible memory card reader (either built-in or external). Please take note that some brands of Micro-SD/TransFlash memory cards have much faster read & write speeds compared to others. The EZ5 can be used even with slow MicroSD/Transflash cards but in such cases a special tool, the Hybrid tool, may be needed for some games to function properly. Users with faster speed Micro-SD/TransFlash cards will not need to use this tool at all. 3.
continue to the main EZ5 menu. It is no longer necessary to keep the ez5upldr.bin file on your Micro-SD/TransFlash so feel free to delete it next time you have it connected to your computer. Also found in the firmware upgrade area is an option to make your EZ5 act like a PassMe device. Pressing the L button will enable you to boot SLOT-2 devices (GBA gamepak sized flash cartridges) in DS mode. 5. Settings in the EZ5 menu When in the EZ5 menu, press L (and hold) and then press R.
Simply ‘Open’ the game or application you are experiencing problems with. Press ‘Send’ to save the patched game on your hard drive or directly to your Micro-SD/TransFlash card. This process only takes a second or two. A bonus feature of this tool is that it can remove empty space at the end of files so they take up less space on your Micro-SD/TransFlash card. This feature is called ‘Trim’. 7. Saves & Saving A dedicated save-chip on your EZ5 card will automatically handle saving for you.
