Integrated Amplifier Instruction Manual 9200

PRECAUTIONS

Please take special note of the following precautions before operating your new amplifier:

• The Plinius 9200 Integrated Amplifier can deliver in excess of 200 watts into 8 ohms. This

amplifier is also capable of a very large peak current delivery.

• The Plinius 9200 Integrated Amplifier operates in Class AB. It is capable of generating heat that

could have an adverse effect on other electronic equipment, furniture, etc. DO NOT leave

flammable material on the amplifier whilst running, as this could pose a serious fire risk.

• This amplifier operates at hazardous voltage levels. There are some alterations that may be made

by you, the owner. However, we recommend that any work requiring removal of the lid be referred

to a suitably qualified and experienced service technician.

• DO NOT attempt to connect any input of this amplifier to its own outputs.

• DO NOT earth any output terminal or connect any of these terminals together without following the

instructions in this manual or seeking qualified assistance.

• DO NOT place this amplifier in any position where liquids, or any foreign material may accidentally

enter it.

• DO NOT connect any voltage source, short circuit, earth/ground or appliance (other than suitable

high fidelity loudspeakers) to the amplifier output terminals.