- Plinius Instruction Manual SB-301

CONNECTING THE MAINS SUPPLY

Now that your Plinius SB-301 Power Amplifier is configured to your system correctly, the mains cable can

be plugged into the IEC connector on the back of the amplifier. Once the power is connected, flick the

main power switch on the front panel to the right. The power LED will pulse until the circuitry within the

amplifier has stabilised. Once the amplifier has stabilised the power LED will stay lit, and the amplifier

will be out of standby, ready for you to enjoy your new Plinius SB-301 Power Amplifier.

WARM-UP PERIOD

You will find that the Plinius SB-301 will sound its best after being on for a period of time. We usually

recommend waiting at least 24 hours before expecting the best quality of sound reproduction from your

amplifier. Also, as the Plinius SB-301 uses very little power while on, we suggest leaving the unit turned

on so that it will always be at it’s sonic best.