User's Guide

PLM150 User’s Guide (LoRaWAN) V1.0

The information contained herein is the property of PLNetworks and is provided without liability of errors,

omissions, and mistakes. No part may be reproduced or copied without written permission or contract.

the user can issue "AT+ECHO=0" to stop ECHO. "AT" and <command> are case sensitive for

the upper (Capital) and lower characters.

[ Table 3 Command Type ]

Start

Command

End

<CR>(0x0d)

The AT command supports Search and Configuration features. The Search AT commands start

with “+” followed by the 4 digit string and the Configuration commands contains command

values after the Search commands.

[ Table 4 Search & Configuration AT Command]

Configuration

+<command>

+<command>=<value>

The following table describes the response message format from the host when Search and

Configuration AT commands are issued.

[ Table 5 AT Response Type ]

Start

Response Message

End

<CR><LF>(0x0d, 0x0a)

<CR><LF>(0x0d, 0x0a)

The response message informs the current configuration values and the updated values after

the configuration changes by AT commands. If any fail occurs during the AT command

execution, “FAIL” message will be sent as the response message.

2.1.2 System Command

System AT commands executes the PLM150 system configuration.