RED OR GREEN LED EXIT SIGN WITH LAMPS SLEETY AND INSTALLATION INSTRUCTIONS WARNING + Installation, service, and maintenance of luminaries should be performed by a qualified licensed electrician. CAUTION Equipment should be mounted where it will not be subject to tampering by unauthorized personnel. Do not mount near gas or electric heaters. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition. Do not use this equipment for any other purpose than its intended use.
RED OR GREEN LED EXIT SIGN WITH LAMPS SLEETY AND INSTALLATION INSTRUCTIONS +» Slide the input leads through the back plate and connect to the supply leads in the junction box. » Unused wires must be capped using enclosed wire nuts. » Connect the battery only after continuous AC power can be provided to the unit. » Place the proper chevron(s) as required. » Secure the face plate to the housing. » Apply continuous AC power and press the TEST button to ensure the wiring is correct.
RED OR GREEN LED EXIR SIN HITÉ LAMPA = SAETEE AND INSTITUCIONAL INSTRUCTIVOS desaire or show particular problema aries chic are not recovero suficiente for the chapurreas or oneroso purpurases, contacta the manufacture. A ADVERTENCIA Antes de instalar, reparar o realizar el mantenimiento de rutina de este equipo, siga estas precauciones generales.