Operation Manual

16 | English
Connecting Anna.
1 2
Click!
Remove the old thermostat.
Position the mounting frame included
with Anna on the wall.
Place the boiler wires through the
mounting frame and screw these rmly
into the connector.
Sometimes it is necessary to drill a few
extra holes for fastening. In this regard,
please be careful not to strike the
existing electrical wiring in the wall.
Position Anna on the mounting frame,
as indicated on the right.
Plug in the boiler again. Plug the Smile
into the power outlet and wait until the
Smile has started up.






Check if the installation has been
completed successfully. The measured
temperature will be displayed on Anna’s
screen. Turn up the room temperature
with Anna by pressing the metal button
on the right side in order for the heater
to start warming up. Check also if the
ame of the boiler has ignited.

Installing the Anna-app.
Download and install the app on your
smartphone or tablet. You will nd the
app in the App Store or in Google Play
under the name “Anna - thermostat”.
Ensure that your smartphone or tablet
is connected to the same network as to
which you have connected the Smile.
Go through the startup screens of the
app. The information is used to heat
your home in a smarter way.
Check if the installation has been
completed successfully. Put the
temperature lower with the app and
check if the ame of the boiler goes
out.


