Installation Instructions

ManualsBrandsPlumb Works ManualsBathOne-Handle 4" Centerset Bathroom Faucet in Brushed Nickel

Installation

- Basin Wrench

- Adjustable Wrench

- Pipe Wrench

- Screwdriver

- Thread Seal Tape

- Supply Lines

- Protective Goggles

- Silicone Sealant

Tools

Single Handle Lavatory

Faucet With Pop-Up

Plumbworks

faucets are crafted with the skill and quality

to last a lifetime. By following the instructions in this

booklet you will enjoy this quality item for years to come.

To clean, wipe gently with a soft damp cloth, then wipe

dry. Plumbworks

finishes are very durable.However, to

assure a long lasting luster, harsh abrasives or polishes

should be avoided.

Maintenance

Turn off the water before loosening any connections

or disassembling the faucet. When working underneath

a sink, protect your eyes from any dust or dirt by wearing

safety glasses.

Safety Tips

Most faucet problems can be fixed by tightening a nut or

connection or replacing a washer. Check supply line

connections for any leaks and tighten if necessary. Don’t

overtighten any supply line connections.

Important Points

Need Help?

Have an installation question? DO NOT RETURN THIS PRODUCT TO THE

STORE. Call toll free: 1-800-545-5230 Monday thru Friday 8:00am - 5:00pm CST

For Models: 673-7140, 673-7141

SLILCONE

SEALANT

Summary of content (8 pages)

PAGE 1
Installation Tools Basin Wrench Adjustable Wrench Pipe Wrench Screwdriver Thread Seal Tape Supply Lines Protective Goggles Silicone Sealant Single Handle Lavatory Faucet With Pop-Up SL SEAILCON LAN E T - For Models: 673-7140, 673-7141 Maintenance Plumbworks® faucets are crafted with the skill and quality to last a lifetime. By following the instructions in this booklet you will enjoy this quality item for years to come. To clean, wipe gently with a soft damp cloth, then wipe dry.
PAGE 2
Parts Diagram / List Pop-up Assembly (complete) 1 Hot/Cold Button 3 2 Handle Screw 34 2 3 Handle 28 4 4 Adjustment Ring 31 1 27 5 5 Dome Nut 6 Cam 7 Cam Packing 8 Stainless Steel ball 29 9 Plug 35 30 6 32 11 Faucet Seat (2) 12 Faucet Spring (2) 26 33 7 10 Cover plate 13 Mounting Bolt (2) 14 O-Rings 15 Fixing Chip 16 Screw 8 17 Copper Tubing 18 Mounting Nut (2) 23 19 Putty Plate 11 20 Outlet 21 Gasket 12 22 Aerator 23 Body Base 24 Aerator Cover 9 20 25 Pop Up Rod 26 Drain Bod
PAGE 3
Preparation/Assembly (Steps 1-5) 1. Shut off the water supply from the stop valves by turning the handle clockwise and remove the existing faucet from the sink. 1 2. Remove any dirt or plumber’s putty from around the faucet holes on the sink. 2 3. Place the putty plate (19) onto the cover plate (23) and thread the mounting bolts (13) to the underside of the cover plate (23). 19 3 13 4. Secure the mounting bolts (13) by tightening them with a Phillips screwdriver. 13 4 5.
PAGE 4
Assembly (Steps 6-10) 6. Secure the faucet by threading the mounting nuts (18) onto the mounting bolts (13). Check the position of the faucet and hand tighten until faucet is securely mounted. NOTE: It is helpful to have a second person hold the faucet in place while tightening the mounting nuts (18).PLEASE NOTE: Do not remove the customer service tag with the model number and phone number as this will be helpful if you need assistance in the future. 7.
PAGE 5
Assembly (Steps 11-15) 11. Remove the drain seat (28) and the pop-up plunger (34) from the pop-up assembly. Turn the mounting nut (27) down towards the center of the drain body (26). 27 26 11 12. Apply a bead of silicone sealant to the underside of the drain seat flange (28). 28 12 13. From underneath the sink, insert the threaded end of the drain body (26) through the drain opening in the sink and screw the drain seat (28) back onto the drain body (26).
PAGE 6
Assembly (Steps 16-20) 16. Place the pivot rod (30) into the opening in the drain body (26), making sure that the rod enters the opening at the bottom of the plunger (34, see figure A). NOTE: Make sure that the pivot rod seal (37) is seated inside the drain body (28, see figure B). figure A 34 30 30 figure B 26 16 17. Slide the pivot rod nut (29) onto the pivot rod (30) and thread the pivot nut onto the drain body (see figure C). Tighten firmly but do not overtighten.
PAGE 7
Assembly (Steps 21-23) 21. Before turning the water on, unscrew and remove the aerator (24) from the faucet spout. If necessary, use pliers and a cloth to protect the finish of the faucet. 8 21 22. Open the hot and cold water supply valves. Check for leaks at the shut off valves and the faucet shanks. If leaks occur, tighten the nuts on the water supply lines and shut off valve. Fill the sink with water to check for leaks.
PAGE 8
Troubleshooting If a faucet installation doesn’t deliver water properly or leaks, finding the cause and fixing it can be easy. Problem: Cause: Uneven water flow. Aerator assembly is dirty or improperly installed Action: Loosen the aerator with a wrench. Use a cloth to protect the finish. Problem: Cause: Replace the aerator Remove the aerator Remove any loose on the faucet. Wrench by turning it counter- dirt or debris from the aerator assembly. tighten by turning clockwise. it clockwise.