Installation Instructions

Assembly (Steps 11-15)

Have an installation question? DO NOT RETURN THIS PRODUCT TO THE

STORE. Call toll free: 1-800-545-5230 Monday thru Friday 8:00am - 5:00pm CST

13. From underneath the sink, insert the threaded end of the drain

body (26) through the drain opening in the sink and screw the

drain seat (28) back onto the drain body (26). NOTE: Be sure to

have the mounting nut and rubber gasket (27) on the drain body

before inserting it into the drain hole.

12. Apply a bead of silicone sealant to the underside of the drain

seat flange (28).

11. Remove the drain seat (28) and the pop-up plunger (34) from the

pop-up assembly. Turn the mounting nut (27) down towards the

center of the drain body (26).

14. From underneath the sink, tighten the mounting nut (27) until the

rubber gasket seals securely to the bottom of the sink. Make

sure that the drain seat (28) is sitting straight. When tightening,

hold the drain body so that the threaded pivot rod opening is

facing ther back of the sink.

threaded

pivot rod

opening

15. Insert the plunger (34) into the drain seat (28). Make sure that the

hole at the bottom is facing the back of the sink