Tools Adjustable Wrench Teflon Tape 3 Groove Jolt Puller Basin Wrench « Phillips Screwdriver + Silicone Sealant Maintenance Your new faucet Is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth. Av old abrasive cleaners, steel wool and harsh chemicals as these will dull the flash and cold your warranty.
Parts Diagram / List '710 nin &—rn Preparation/Assembly No. Part Name 1 Spout 2 Spout Collar 3 O-Ring 4 Handle 5 Set Screw é Body 7 O-Ring 8 Switch Seat 9 O-Ring 10 Spring 11 Switch Red 12 Switch Core 13 O-Ring 14 Inner Body 15 Base 16 O-Ring 17 Inlet Pipe 18 Lock Nut 19 Coupling Nut 20 Base 21 Washer 22 Washer 23 Washer 24 Metal Washer 25 Ring 26 Flow Restrict or 1. Shut off the water supplies before installation.
Installation Instructions 4. Attach washer (#23) and metal washer (#24) from the bottom, and lock nut (#18) on the mounting body, then tighten but do not over tighten. Hint: Have someone hold the faucet in place while tightening. f=—= Please Note: Do not remove the customer service tag with the model number and phone number as this will be helpful if you need assistance in the future. . Insert flow restrict or (#26) into inlet pipe ifl—u .
Trouble-Shooting If you've followed the Instructions carefully and your faucet still does not work properly, take these corrective steps. Problem Cause Acton Leaks underneath handle. Q-ring or O-ring [#9] is broken. | Replace O-inf (#7) or O-ring Water will not shut off completely. | O-ring (#13) is broken.
