Use And Care Manual

Attach base (#20), (#21) and was er (#22)

to the inlet pipe (#17), position the faucet on

countertop as shown. See diagram for visual.

washer h

Base

Spout Collar

Ring

Flow Restrictor

Metal Washer

Switch Seat

Switch Srping

Switch Rod

Switch Core

Inner Body

Inlet Pipe

Coupling Nut

Base

Washer

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,

just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,

just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.

6736998

Drinking Water Faucet

Basin Wrench

Unscrew the coupling lock nut (#18).nut (#19) and

supply

the

1-3

PAGE 1
Spout Collar 6736998 Drinking Water Faucet Switch Seat Switch Srping Switch Rod Switch Core Basin Wrench Inner Body Base Inlet Pipe 21 22 23 25 26 21 22 23 24 25 26 Coupling Nut Base Washer Washer Washer Metal Washer Ring Flow Restrictor 24 the supply the Unscrew the coupling nut (#19) and lock nut (#18). 18 19 Attach base (#20), washer (#21) and was h er (#22) to the inlet pipe (#17), position the faucet on countertop as shown. See diagram for visual.
PAGE 2
Installation 4. Attach washer (#23) and metal washer (#24) from the bottom, and lock nut (#18) on the mounting body, then tighten but do not over tighten. O-ring (#7) or O-ring (#9) is broken . Replace O-ring (#7) or O-ring (#9) . O-ring (#13) is broken. Replace the o-ring (#13). 23 24 18 Please Note: Do not remove the customer service tag with the model number and phone number as this will be helpful if you need assistance in the future. 5. Insert flow restrictor (#26) into inlet pipe (#17). 26 6.