Use And Care Manual

(2)

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,

just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,

just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,

just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.

3-7/8 -4

(#26)

(#24)

(#23)

(#27)

(#25)

Turn on hot and cold water supply lines. Turn on the

faucet and let the water from the tub spout for one

minute to flush the debris from the line.

If there is a leak, refer to correct section and repeat

step.

Before installation, please slip flange (#22)

onto the longer end of shower arm (#23).

Wrap threads of the longer end of shower

arm with teflon tape and install shower arm.

Wrap threads of the shorter end of shower

arm with teflon tape and install

shower head (#24).

counter

(#6)

40"~46"

72"~78"

Floor

PAGE 1
Turn on hot and cold water supply lines. Turn on the faucet and let the water from the tub spout for one minute to flush the debris from the line. If there is a leak, refer to correct section and repeat step. (2) 40"~46" 72"~78" Before installation, please slip flange (#22) onto the longer end of shower arm (#23). Wrap threads of the longer end of shower arm with teflon tape and install shower arm. Wrap threads of the shorter end of shower arm with teflon tape and install shower head (#24).
PAGE 2
Install escutcheon (#6) and secure with screws (#4) and o-ring (#5). Make sure valve is in off position. Please Note: Do not remove the customer service tag with the model number and phone number as this will be helpful if you need assistance in the future. Lock nut (#11) cartridge (#12) Rubber valve seat at the base of pressure balance cartridge (#12) is dirty or broken. Assemble the handle (#3) on the escutcheon (#6), secure with the set screw (#2) and install the handle button (#1).