User's Manual

Model 2112 Modular Tag Manual
Page 13 of 16
15.212 (a) (1) (vi) (B)
REQUIREMENT:
Electronic display of FCC identification number.
IMPLEMENTATION:
Not applicable, since the 2112 Modular Tag will not be installed in any product that has an electronic
display.
15.212 (a) (1) (vii)
REQUIREMENT:
“The modular transmitter must comply with any specific rules or operating requirements that ordinarily
apply to a complete transmitter and the manufacturer must provide adequate instructions along with the
module to explain any such requirements. A copy of these instructions must be included in the application for
equipment authorization”
IMPLEMENTATION:
These instructions will be included as a user’s manual with any upward product the 2112 Tag module will
be integrated into. i.e.: The instructions for the current PLUS Tags will apply to products incorporating the
2112 Tag module.
15.212 (a) (1) (viii)
REQUIREMENT:
“The modular transmitter must comply with any applicable RF exposure requirements in its final
configuration”
IMPLEMENTATION:
See all tests the 2112 Tag is compliant with under Section 15.212 (b).
15.212 (a),(2), (i),(ii),(iii), and (iv)
REQUIREMENT:
Split modular system.
IMPLEMENTATION:
The 2112 Module is not a split modular system so 15.212 (a) (2) sections (i),(ii),(iii), and (iv) do not apply.