User's Manual

Model 2112 Modular Tag Manual
Page 6 of 16
Introduction
The Plus Model 2112 Modular Tag is a complete PLUS UWB Tag design for integration into a PLUS printed
wiring assembly (PWA) and enclosure, and connected to a power source. It has the following features:
• Runs from a 3 volt DC power source (can operate down to 2 volts DC)
• Will transmit a UWB packet at a rate set at time of manufacture. Rate can be set to 1Hz, 6Hz, 8Hz,
10Hz, 15Hz or 20Hz.
• Meets FCC Section 15.212, rules concerning single modular transmitters.
• Certified to comply with FCC Part 15.519
• This Module is limited to OEM installation Only.
Formatted: Font: (Default) +Body (Calibri), 12 pt