User Manual

Model 2110 Limited Module Tag Manual
Page 10 of 12
Mounting
Depending on end user requirements, mounting methods will vary.
Identification
Per FCC Section 15.212: The 2110 Tag FCC identification (ID) will be printed via the silkscreen on the bottom side
of the board.
Figure 1-1 below shows the FCC ID as it appears on the bottom of the board right above the PLUS copyright
and PWB identification:
FOR THE USER IMPLEMENTATION OF THE 2110 TAG:
Per FCC Section 15.212: The FCC identification (ID) information for the 2110 Modular Tag must be visible on
the End product. The information must include product model number and the statement “CONTAINS FCC ID
ZEH0414”. Other information such as a unique serial number is encouraged but is not a requirement. PLUS
document 320-0305 provides a template for required information and layout for the End Product ID label.
Figure 1-1