User's Manual

Quick Start Guide Page 3 of 26
2. Quick Start Guide
2.1 Insert SIM card and battery
 Press turn it off;
 Slide the cover downwards and remove it;
Remove the battery. Insert SIM Card 1 (per the mark “SIM1” on the card slot. The contactor shall face down
(note the notch on the SIM card is in line with the slot). Push the SIM card inwards from the card slot until it
absolutely fits the slot. Insert SIM Card 2 in the same manner.
Insert the battery with metallic contact aligned to the cellphone battery contact and replace the cover.
2.2 Insert memory card
This cellphone supports the T-Flash memory card. After it is inserted, you can browse or copy, etc. the files stored
in the memory card. Also, the memory space of this device can be expanded.
 Remove the cover and battery and turn over the cover of the memory card in the direction as shown thereon;
 Let the side of the memory card bearing metallic contact face down, insert the narrower end into the card
slot until absolutely fitted by it, and replace the back cover.
2.3 Battery charging
The cellphone battery may be charged with travel charger.

Insert the battery in the device correctly;
 Let the charger arrow towards the screen, insert the charger plug into the interface, and connect the charger
to the standard power supply socket.
 After charging is over, cut off the connection between the charger and the standard power supply socket.