Users Manual Part 2

E-25
DragtoMyDocuments
Onthecomputer,open“MyComputer”,andfrom
thereopenthenetworkboardidentifiedasa
removabledevice.
(1) Double-clickthe“MyComputer”(or“Computer”)icontoopen
it.
(2) When thedeviceicon for the networkboard (displayed as a
removabledisk) isdouble-clicked, the networkboard’s inter-
nalmemoryopens.
The“CBImage”fileisthescannedimagefile(“.jpg”,“.png”or
“.pdf”,accordingtosetting).
• The“setup”foldercontainsthesimplenetworksettingsfile.
(3) Copy the “CBImage” file to [My Documents], etc., on the
computer(“.jpg”,“.png”or“.pdf”,accordingtosetting).
To disconnect the USB cable, follow the procedure in step 3 on
pageE-23.
Notethattheimagedatainthenetworkboard’scomputerstorage
memoryisdeletediftheoperationfordisconnectingtheUSBcon-
nectionbetweenthenetworkboardandcomputerisperformedat
thistime.
Note
If both USB memory device and computer areconnected to
the network board,data is saved in memory for PC. Data is
notsavedinmemoryforUSB.
• The “setup” folder will be created in memory for PC. This
folder contains the “setting.ini” file recording the firmware
version,MACaddress,networksettings.
 For details, refer to the separate “N-31 Series Network
Manual”.
Usingthenetworkboardconnectedtoacomputer