Specifications

PLC-XP46
PROJECTORS
SANYO
(212) 444-6605 • 1-800-947-9905 • Quick Dial 821
PHOTO - VIDEO - PRO AUDIO
155
Conveniences
Compatible with HDTV (480i, 480p, 576p,
720p,1080i) signals as well as NTSC, NTSC
4.43, PAL, PAL-M, PAL-N and SECAM.
Projection image can be adjusted to suit
the size of any room. Project a 31
(diagonal) image just 4.6’ from the screen.
Or from the maximum throw distance of 48’,
project an amazingly large 400” (diagonal)
image. Optional lenses increased flexibility.
Includes an infra-red remote control with a
laser pointer to make smart presentations.
The remote also incorporates a wireless
mouse function for a connected computer.
This function enables you to operate both
projector and computer with one control.
Equipped with an extensive array of input
terminals to suit a range of projection
sources. DVI-D is optimized for PC input.
A USB port is included together with the
control port. And there is a component
input for high-definition signals.
Equipped with a whisper quiet fan which
produces an amazingly low noise level of
only 35dB (Eco mode).
Built-in stereo amplifier and speakers
Presentation Timer shows a running clock
on the display screen.
User Logo function for customizing a start-up
screen using captured images or logos.
No Show function lets you temporarily
stop displaying the projected image, so the
audiences attention can be focused on the
presenter rather than the screen.
When a signal isn’t detected after five
minutes, automatically shuts down the lamp.
Designed for straightforward use, the GUI
provides a choice of11 languages.
Includes 3-year parts and labor warranty
(90 days on the lamp) as well as Sanyos
Quick Repair Program where they pay the
overnight freight charges to have the
projector repaired in 24-72 hours.
PJ-Net Organizer
The PLC-XP46 an be connected to a
computer network via the optional
PJ-Net Organizer or management
and control capabilities. Projectors
located in several different locations
can be controlled from a single
computer using your normal web
browser — there is no need for any
special software.
The POA-PN01 PJ-Net Organizer is an
advanced tool for network control
and administration of the PCL-XP46.
Through an ethernet connection using the IP addressing scheme, projector functions
such as power status, lamp status, input mode, signal condition, lamp-use time, etc. can
be monitored using a web browser. Again, no additional application software is needed.
When abnormalities such as lamp failure or power failure occur, or if the projector
malfunctions, an e-mail alert message can be sent to the registered e-mail addresses.
An Automatic Timer function can turn on or off a series of projectors at a specified day,
date and time. You can program the days and times of projector use (maximum 10
events) so that the projector will automatically switch on and off. The timer can be
programmed to run every day or every week, or for specific days.
Using a web browser application, you can check on the condition of the projector or
adjust the controls in the following ways:
– Projector condition: lamp use time, projector use time, in-store condition, power supply,
input information
– Projector controls: power (on/off), input mode, PC, system, image, and other settings
– Saving/downloading of settings: input mode, system, image and screen settings can be
stored or downloaded
With Multi-Control, a single computer can control and setup multiple projectors at the
same time. Up to 99 projectors can be operated from a single computer without the
need for any special control boxes or software.
PJ-Net Organizer is equipped with an RS-232C serial communications port. This allows
RS-232 control systems to be used in parallel with these network control components.
UP/DOWN LEFT/RIGHT
KEYSTONE CORRECTION
In addition to up/down keystone correction (maximum –40°), Sanyo has added left/right
keystone correction (maximum –10°) to this projector. This makes it possible to project correct-
looking images even if the projector is not directly in front of the screen.