Specifications

Network Function
Optional interface boards for 10Base-T and 100Base-TX make them
network-ready. With one of these boards mounted, all
functions can be controlled from a computer on a local
area network (LAN) or over the internet via a standard web
browser without any additional software. The projectors will
even send an e-mail message to alert you of any operating errors or notify you
when a lamp needs to be replaced, providing advanced maintenance ease and reliability.
Projector Network Interface Board
(PAETMD75NT) ................................................................................1559.95
Optional Board Modules
In addition to the supplied connection terminals, an optional board module can be selected to
match a variety of input source signals, including digital serial component signals.
DVI Interface Board (PAETMD77DV).............................................1499.95
SDI (480i/576i) Input Board
(PAETMD77SD1)............................1624.95
SDI (720p/1035i/1080i/1080-24p)
Input Board
(PAETMD77SD3) ...........................................................4679.95
Network I/F Board
(PAETMD77NT) ................................................1249.95
Analog RGB Input Board
(PAETMD95RGB) .......................................CALL
Video/S-Video Input Board
(PAETMD95VM2) .................................CALL
www.bhphotovideo.com
PHOTO - VIDEO - PRO AUDIO
PROJECTORS
PANASONIC
PT-D7500U • PT-D7600U
128
Connection Flexibility
◆ They feature two computer (RGB) inputs,
one of which doubles as a monitor
loopthrough output, (RGB 2 IN can be
switched for use as a monitor loop-through
output for RGB1), as well as three video
inputs (component, composite and S-Video).
◆ HDTV-ready, these units can automatically
synchronize to display 1080/24p,1080i, 720p,
480p and 480i video in the 16:9 ratio.
◆ They offer RS-232C and RS-422 input/output ,
two remote inputs, and one remote output.
◆ No more trade-off between image quality
and portability— now you can bring a
high-performance DLP-based projector
where it used to be too difficult. And they
offer quick, easy, and flexible installation.
Two types of optional ceiling mount brackets
are available, plus the dual stacking mount
bracket lets you double the brightness–
10,000 lumens for the PT-D7500U and 12,000
lumens for the PT-D7600U.
Quiet and Reliable Operation
◆ Designed for quiet operation, a fluid-cooled
optical system and noise-suppression duct
and control system help minimize operating
noise. The fan rotation can be adjusted in
fine steps, so fan noise is reduced when
rotation adjusts to match room temperature
changes. This minimizes sudden increases in
fan noise during operation. Fan noise when
switching the power off is also reduced.
◆ The use of two high-brightness 300w UHM
lamps with up to a 2,000-hour life per lamp,
(BriteOptic Dual Lamp System) eliminates
the need to interrupt a presentation if a
lamp burns out (in dual lamp mode).
In single lamp mode, the lamp auto changer
function allows non-stop operation 24 hours
a day for a full 365 days.
◆ Dust-free design helps ensure that they will
continue to deliver crisp, high-resolution
images over an extended service life.
Multi-Screen Projection
The projectors offer built-in multiscreen color matching and edge blending for displaying
uniform, natural-looking, full-motion images over the entire span without any discernible
lines between overlapping projected images. An outstanding benefit of edge blending is
that it increases the image’s horizontal resolution while maintaining the maximum vertical
resolution. Up to100 projectors (10 x 10) can be edge blended at one time.
Color Matching: When several units are used together, this function corrects for
slight variations in the color reproduction range of individual projectors. The PC software
assures easy, accurate control. To simplify the set-up process, you can adjust the projectors
before delivery to the presentation site. The color-matching function accommodates up to
nine units, for multi-screen or single screen presentation.
Edge Blending:
This function controls the brightness at
overlapping image edges to assure uniform,
natural-looking, multi-screen images. When
projecting HD sources with a single projector,
part of the DMD device is unused. In multi-screen
projections with two projectors, the DMD devices
increase the image’s horizontal resolution while
maximizing vertical resolution.
Built-in Multi-Screen Processor:
The PT-D7600U and PT-D7500U can project large, multi-screen images without any addi-
tional equipment. Up to 100 projectors (10 x 10) can be edge-blended at a time.
SDI Input Board (PAETMD77SD1)
SDI Input Board (PAETMD77SD2)
Video/S-Video Input BoardHDI Input Board (PAETMD77SD3)DVI Interface Board
Analog RGB Input Board