Specifications

PLV-Z2
PROJECTORS
SANYO
(212) 444-6605 • 1-800-947-9905 • Quick Dial 821
PHOTO - VIDEO - PRO AUDIO
141
FEATURES
800 Lumens Home Theater Projector
There was a time when owning a home theater projector meant
sacrificing image quality for screen size. Not any more. With the
PLV-Z3, movies are sharper, bolder, and more realistic. It delivers
accurate color, superb contrast, and uniform brightness across an
entire100” 16:9 screen. TopazReal technology — real 10-bit digital
image processing, electronic lens iris, and React Image mode —
enables higher-definition projection of all video formats. Now
you can experience DVDs and HDTV with the overwhelming
wide-screen impact they deserve.
High Quality
Three wide, 0.7”, 1280 x 720 LCD panels
enables artifact-free, wide-screen projection
up to 100” even in small rooms.
Achieve a remarkable 2000:1 contrast ratio.
Sanyos original Dimmer and lens diaphragm
measures screen brightness and automatically
determines the appropriate volume of light
for the lamp. No more glaring whites or
murky, undifferentiated blacks.
Advanced Mode provides a range of
adjustments: RGB gain; gamma correction;
offset adjustment; lens iris adjustment;
outline correction; black level extension;
and adjustment of the restoration rate of
the direct-current.
Color temperature can be adjusted in five
steps, depending on source, to maximize
viewing pleasure. Adjustable white balance
to match your viewing requirements.
Easy Setup
Short throw lens with its1.3x optical zoom
affords large-screen viewing in small rooms.
The zoom lens projects images onto a100”
screen from a throw distance of 10- to 12’.
The vertical and horizontal lens shift
(physical repositioning of the lens itself)
allows you to adjust the screen projection
easily, without having to move the projector.
The adjusted image suffers no visible
deterioration, even when shifted up to
±100% vertically or ±50% horizontally. Even
if the set-up location isn’t quite right, the
projected image will remain intact.
Provides the flexibility to set up the projector
in line with room conditions – hang it from
the wall, ceiling, or put on a shelf.
Digital ±20° vertical keystone correction for
situations where vertical or horizontal lens
shift alone isn’t enough.
TopazReal for Enhanced Video Projection
Under the TopazReal banner, Sanyo brings together three technologies that improve
video signal processing, enable fine-tuned lens iris adjustment, and provide total control
of lamp
light volume. It ensures higher-definition projection of all video formats.
With1024 gradations for each of the RGB channels, the PLV-Z3 delivers four times more
color gradations than conventional projectors. Achieve beautiful projection and
impressive color precision with approximately1.07 billion colors.
Via remote control, you can precisely adjust the contrast from100% to 60% in 64 steps.
The lens iris contracts and dilates smoothly, without noticeable jumpiness.
The PLV-Z3 analyzes the average picture level (APL), and controls the lamp automatically.
Choose between Bright, React Image 1, React Image 2, and Theater Black modes. React
Image 2 provides a heightened sense of image contrast, while also reducing noise.
Conveniences
Seven one-touch pre-sets are available to
optimize color, brightness, contrast levels for
a particular viewing need:
— Creative Cinema Mode: emphasizes the
sense of contrast, as well as any 3-D effects.
— Natural Mode: offers faithful reproduction
of the input signal.
Video Mode: is best suited to projecting
sports or dramas from TV.
— Dynamic Mode: enables projection in
bright rooms.
— Powerful Mode: provides projection with a
sharp, powerful picture tone.
— Graphics Mode: ideal for projecting graphic
images from games or computers.
Intelligent fan control system adjusts the
revolving speed of the cooling fan in line
with changes in ambient temperature. This
results in exceptionally low noise of 23dBA.
Equipped with an HDMI (High Definition
Multimedia Interface) terminal, as well as
two other sets of component inputs.
Drop-down panel protects the lens and
gives the projector a sleek, minimalist
profile. So, when it’s not in use, the PLV-Z3
blends in seamlessly with its surroundings.
‘My Screen function lets you capture a
projected image and use it as a startup or
default screen. You can also project the
image whenever you want by using the
‘My Screen’ button on the remote control.
Includes illuminated multi-function remote
control.