DATA PROJECTOR V-1080/V-807 User’s Manual Q ME UIC NU K AU TO CE UR PO WE R SO ME NU S PO WE R AT U ST VO L VKST N N ST HK EL NC CA Z OO M EN TE R AU MEN U AS QU IC PE YC S-V VID E TO CT K IDE r PIP M EZ bP B AL FR E r YP RG O DIG IT bC O OF UT E PO E F WE R ON IMPORTANT Digital Light Processing, DLP, Digital Micromirror Device and DMD are all trademarks of Texas Instruments. Windows 98, Windows 95, and Windows 3.
IMPORTANT SAFETY INFORMATION Precautions Please read this manual carefully before using your PLUS V-1080 / V-807 Data Projector and keep the manual handy for future reference. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
IMPORTANT SAFETY INFORMATION Important Safeguards These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them carefully and heed all warnings. Installation • • • • • • For best results, use the unit in a darkened room. Place the unit on a flat, level surface in a dry area away from dust and moisture. Do not place the unit in direct sunlight, near heaters or heat radiating appliances.
IMPORTANT SAFETY INFORMATION Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside the unit. Allow at least 10 cm (3 inches) of space between the unit and walls. • Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do not attempt to retrieve any objects that fell into the unit. Do not insert any metal objects such as a wire or screwdriver into the unit.
Major Features Book-sized, lightweight (at about 0.9 kg/2.0 lbs) and small high-intensity mobile projector DMDTM and the synergistic effects of our own optical design serve to improve the optical utilization efficiency. The three light sources (RGB) required in color expression are reproduced with one DMDTM. These factors have enabled a design that offers both high intensity and small size/lightweight features.
Table of Contents Preparation and Background Knowledge IMPORTANT SAFETY INFORMATION ............................................................................ E-2 Major Features ................................................................................................................. E-5 Table of Contents ............................................................................................................. E-6 Checking the Supplied Accessories ................................................
Table of Contents Menu Operations Menu Operation Method ................................................................................................ Names and Functions of the Parts ............................................................................ Names and Functions of the Remote Control Buttons that Operate Via a Menu ...... Names and Functions of the Main Unit Buttons Used in Menu Operation ................ Names and Functions of Menu Screen Parts .........................................
Checking the Supplied Accessories Remove the main unit and the accessories from the box and check that the following items are included. Remote control (includes one button battery) [1] This controls the projector. Please remove the transportation insulation sheet at time of purchase. (See Page E-13.) Power cable (1.8 m / 5.9 feet) [1] This power cable supplies power to the unit. See Page E-24 about connections.
Checking the Supplied Accessories Audio cable (2.5 mm diameter plug / RCA pin plug, 1.5 m / 4.9 feet) [1] This cable is used with equipment that has phono type audio jacks. Connections are described on Page E-23. No. 772706000 Soft pouch (for projector and accessories) [1] This pouch is used when storing or moving the projector. The pouch is made up of two portions that are joined by hook-andloop tape to form a single item. The pouch can be separated into two pieces.
Names of the Main Unit Parts STATUS indicator [E-61] POWER indicator [E-24] S TA TU S P POWER button [E-24] O MENU button [E-38] W E R P O W E M R E N O U S C R U E SOURCE button [E-28] U TO QUICK MENU button [E-32] DIO EO R PO SO UR C AU VID Q ME UIC NU K AU A K IC U U Q EN M AUTO button [E-28] TO E NU WE ME ST AT US PO WE R Speaker Remote control sensor [E-14] Exhaust vents Exhaust vents Front adjuster Ventilation slots Remote control sensor Front adjuster button [E-27
Names of the Main Unit Parts AUDIO jack [E-23] VIDEO jack [E-21, 22] E C R U O S A U TO K IC U U Q EN M AU DIO PC connector [E-18,19,22] VID EO PC Ventilation slots S TU TA S W O P Built-in security slot (See description below.
Names of the Remote Control Parts N VKST EL NC CA OM ER N ST HK ZO EN T AU ME NU AS QU IC PE K YC S VID E -VID E ITA r YP MU T EZ bP OF E PO E r PIP RG B L FR E bC O O DIG TO CT WE F R Infrared transmitter [E-14] ON POWER button [E-24] FREEZE button [E-31] (Freezes moving pictures) MUTE button [E-31] (Temporarily cancels the video and audio) ON POWER OFF FREEZE MUTE PIP DIGITAL RGB YPbPr VIDEO S-VIDEO YCbCr QUICK ASPECT AUTO QUICK button [E-32] (Displays a
Preparing the Remote Control Button Battery Replacement Using the remote control for the first time The battery compartment is fitted with a transportation insulation sheet at the time of shipping. Pull out the sheet and remove it. The remote control is now ready for use. Replacement Method the tip of a ballpoint pen or some other pointed object into the hole of the 1 Insert battery holder, then pull out to open.
Preparing the Remote Control Remote Control Range Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit and operate. Reception of the remote control signal should generally be possible within the range illustrated below. 4m Remote control infrared transmitter / 13 Remote control sensor eet .1 f 30˚ 30˚ Side View 7m / 23 feet 4m 3.
The Procedure Up to Projecting to the Screen Perform setup adjustments in the following order. 1 Position the projector See "Projection Distance and Screen Size" on Pages E-16 and E-17. Determine the locations to set up the screen and the projector. 2 Connect the video equipment and personal computer Connect your equipment to the projector. When the personal computer has a DVI connector or a mini D-sub 15-pin connector See "Connections with PC Connectors" on Page E-18.
Placement Guide ● Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or to find out the approximate size of a screen that will be required. ● The projection distance over which focussing is adjustable is 1.2 m (3.9 feet) to 6.9 m (22.6 feet) from the front of the main unit lens for V-807 and 1.2 m (3.9 feet) to 6.6 m (21.7 feet) for V-1080. The projector should be placed within this range.
Placement Guide V-1080 Screen Size and Projection Distance Height from center of lens to top edge of the projection m (feet) 4.0(13.1) 200" 180" 3.5(11.5) 2.5(8.1) 120" 100" 2.0(6.6) h1 80" 1.5(4.9) 60" Screen Height 150" 3.0(9.8) 40" 1.0(3.3) 36" 0.5(1.6) h2 17.2˚ Projection angle 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 (m) (1.6) (3.3) (4.9) (6.6) (8.1) (9.8) (11.5) (13.1) (14.8) (16.4) (18.0) (19.7) (21.3) (23.
Connecting Personal Computers and Video Equipment ● Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equipment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home theater.
Connecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin Connector * Make the connection to the projector's PC connector and the mini D-sub 15-pin connector through the use of a DVI/mini D-sub 15-pin conversion cable. * When connecting, arrange the connectors in the proper orientation and plug in. Turn the screw knobs and fasten to the connector of the main unit. * Switch the input selection of the projector to "Analog RGB".
Connecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your notebook computer or the on-line help while performing the following procedure.
Connecting Personal Computers and Video Equipment Connections with Video Connectors Video Equipment with VIDEO Connectors * Make the connection to the VIDEO connector of the projector using a video cable. * Switch the input selection of the projector to "Video". Video Equipment with S-VIDEO Connectors * Make the connection to the VIDEO connector of the projector using an S-video cable. * Switch the input selection of the projector to "S-Video". Video deck, DVD player, document camera, etc.
Connecting Personal Computers and Video Equipment Connections with Component Signals When the Video Connectors are Y, Cb, and Cr Connectors * Make the connection to the projector's VIDEO connector using a component signal cable. * Switch the input selection of the projector to "YCbCr".
Connecting Personal Computers and Video Equipment Connections with Audio Connectors * Make the connection to the projector's AUDIO jack using an audio cable. * The built-in speaker of the projector provides monaural audio. * To enjoy convincing audio reproduction, please connect the audio output of the video equipment to your audio system. Video equipment, personal computer AUDIO VIDEO PC AUDIO L R White Red Audio cable (Supplied item) Note The AUDIO jack of the projector is a 2.
Power Cable Connections and Switching the Power On/Off There is an order in which the power cable is connected and the power is switched on/off. Operating 1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable. The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will enter the standby mode.
Power Cable Connections and Switching the Power On/Off Finishing 1 Switch off the power of the connected equipment 2 Switch off the power of the projector Main unit operation: Press and hold the POWER button for a while. Remote control operation: Press the POWER OFF button. ON POWER OFF The "Power Off" indication will appear. When the red bar extends fully (in about 5 seconds), the projection screen will go off and the unit will enter the power off operation.
Adjustment of the Projection Screen Switch on the power of the connected equipment and make the adjustments with the video signal being input to the projector. Projection Screen Position Adjustment Adjust the projection image to the screen. Check that the screen is set level and vertically. (1) If the image is shifted to the left or right, move the main unit horizontally. (Align the center of the screen and the center of the lens of the main unit.
Adjustment of the Projection Screen Making Adjustments with the Adjusters Care must be taken not to come into contact with the ventilation slots which discharge the heat of the lamp. Q ME UIC NU K SO PO WE R UR AU TO CE ME NU STA TU S PO WE R Raising the projection image While viewing the projection image, press hand hold the front adjuster buttons located at the left and right (1) and, raise the projector to align the image with the screen, then release your fingers (2).
General Operation This section describes the use of direct operation with the main unit or remote control buttons. For information about operation using the menu, see "Menu Operation Method" on Page E-37 and the various items on Pages E-46 to E-60. Input Selection This operation selects the input signal to be projected. MENU Main unit operation: Press the SOURCE button. (It will not function while the menu or the quick menu is displayed.
General Operation Automatic Adjustment of Analog RGB This function automatically adjusts the position shift of the analog RGB input signal, the size of the picture, vertical striping, and color infidelity. Normally, this function is adjusted automatically at the time of signal selection. MENU AUTO SOURCE Main unit operation/Remote control operation: Press the AUTO button. (This will not function while the menu or the quick menu is displayed.) A press of the AUTO button starts the automatic adjustment.
General Operation Selection of Aspect Ratio This function selects horizontal and vertical picture proportions of the input signal. Press the ASPECT button while viewing the projected image and select the aspect ratio. Personal Computer Image (when selecting digital RGB or analog RGB) Each press of the ASPECT button advances the selection one step in the sequence of Auto → Direct → Real, and then repeats. Auto ............
General Operation Projecting a Sub-Picture This function displays the video image (i.e., the picture of the VIDEO connector input) on the personal computer screen (i.e., the PC connector input screen) as a sub-picture. Sub-picture Each press of the PIP button advances the screen size of the sub-picture one step in the sequence of Small → Medium → Large → Off (i.e., the sub-picture display is off), and then repeats.
General Operation Using the Quick Menu This function permits frequently used adjustments to be performed quickly. Note that the Quick Menu will not be displayed unless the signal of the connected equipment is input. Please select the input that you wish to adjust. MENU Main unit operation (1) A press of the QUICK MENU button brings up the quick adjustment display. Further presses allow selection of the desired adjustment display. (2) Press the or button to make the adjustment.
General Operation Content of Adjustments and Settings Example: Brightness adjustment display Brightness Display Item 0 – + Adjustment/Setting Brightness Adjusts the brightness of the image. Brightness decreases in the (-) direction and increases in the (+) direction. Contrast Adjusts the contrast of the image. Contrast becomes less distinct in the (-) direction and more pronounced in the (+) direction. V Keystone Corrects (vertical) keystone distortion of the screen.
General Operation Correcting Keystone Distortion of the Projection Screen This adjustment is used when the projection screen is distorted. Note that extreme distortion cannot be corrected and in such circumstances the projector should be placed to face the screen straight on beforehand. (3) CAN U CEL MEN ENTER HKS N TN VKST ZOOM VOL (1) (1) (2) Adjustment Method (1) To adjust up-down distortion (e.g., Screen Example 1), press the HKSTN button.
General Operation Enlargement of the Image and Video Movement This function digitally enlarges the personal computer image and video image (up to 10 times). (3) (1) Press the ZOOM button. The zoom selection display will appear. CAN U MEN Zoom 21 – (4) CEL + ENTER (2) Enlarge to the desired size. Each press of the (+) button enlarges the image and each press of the (-) button makes the image smaller (returning it to 1:1).
General Operation Adjustment of the Volume This function adjusts the volume of the built-in speaker. (1) Press the VOL button. The volume adjustment display will appear. Volume 53 – (3) CAN U CEL MEN + ENTER (2) Adjust the volume. The (+) button increases the volume and the (-) button decreases the volume. (3) To close the display immediately, press the CANCEL button. In the absence of operations for a period of about 10 seconds, the display will close automatically.
Menu Operation Method ● This section describes only the menu operation method. Please see this page should you need information while performing menu operations. ● For information about a menu function, adjustment, or setting, please see one of the pages containing such descriptions. ● Adjustments and settings are made by projecting an image and adjusting to an optimum condition. ● The remote control should be pointed toward the remote control sensor of the projector and operated.
Menu Operation Method Names and Functions of the Main Unit Buttons Used in Menu Operation STATUS POWER POWER MENU button Used to display menus, to return to menu name selections, and to close menus (i.e., closing sub menu displays). MENU SOURCE (AUTO) button Advances the selection of menu names. Advances the setting/ adjustment values of the item contents. Also serves the function of the remote control ENTER button. AUTO QUICK MENU (QUICK MENU) button Used in the selection of item names.
Menu Operation Method Performing Menu Operations ● The menu operations of the main unit buttons differ from those of the remote control buttons. When both the main unit and remote control button operations are the same, the operation is described under the remote control operation; however, only when different, the operation will also be described under "Main unit operation". ● When a signal is not being input, only “Color”, "Setup" and "Info." can be selected.
Menu Operation Method 2 Selection of the Menu Name Press the cursor ( ) button to select the menu name Red CAN U CEL MEN Image ENTER Color View Aspect Filter HKS Info. 3 Projection N VKST TN Setup Auto Keystone Each press of the cursor ( ) button advances the selection one step in the sequence of "Color" → "View" → "Setup" → "Info." → "Image". Each press of the cursor ( ) button causes a return of one step. The selected menu name will appear in red.
Menu Operation Method 4 Selection of the Item Name Press the cursor (▲▼) button to align the cursor with the item name CAN U CEL MEN Image ENTER Color View Aspect Filter HKS Info. 3 Projection N VKST TN Setup Auto Keystone Main unit operation: Press the (QUICK MENU) button. When the cursor has moved to the very bottom of the items, another press will move it to the very top of the items. Press the cursor ( ) button since the "Keystone" example of the description diagram displays the icon.
Menu Operation Method 6 Closing the Menu Press the MENU button and close the menu display CAN U CEL MEN ENTER HKS N VKST TN Main unit operation: Press the MENU button and cancel the cursor display. When a sub menu is displayed, press the MENU button to close the sub menu, then press again to cancel the cursor. This condition allows the menu name to be selected. MENU Image Cursor Color View Aspect Filter SOURCE Setup Info.
Menu Operation Method Selecting Another Menu Name with Remote Control Operation When a sub menu is displayed, press the CANCEL button and close the sub menu. Press the CANCEL button again and cancel the cursor display. Image Color View Setup Info. Auto Aspect 3 Filter Projection Keystone CAN U CEL MEN Image Color View Setup Info. ENTER Aspect Auto Filter HKS N 3 Projection VKST TN Keystone Press the cursor ( ) button and select the menu name.
Menu Operation Method List of Item Names Offering Input Selection and Adjustments/Settings The item names that can be adjusted/set will differ depending on the input signal. [Example of Menu Display Items at the Time of Input Signal Video Selection] Image Color View Aspect Setup Info. Auto Filter 3 Projection Keystone V Keystone 0 – H Keystone 0 – + + Off Keystone Save Image Color View Brightness Contrast Picture Adj.
Menu Operation Method [Example of Menu Display Items at the Time of Input Signal Video Selection] Image Color View Setup Info. Language Auto Source On Auto Power Off Off On Screen On Menu Position YPbPr Disable Background Black Menu Name Setup Info.
Picture ● Perform this operation while projecting the picture for which the adjustment/setting will be made. ● Select the menu name "Picture". See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations. The item name display will differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Pages E-44 and E-45.
Picture Picture Adj. / Fine Picture / H Position / V Position These adjustments are available when analog RGB signals are input. Usually, automatic adjustment is performed at the time of signal selection, but when automatic adjustment is not effective, these adjustments can be performed. Brightness Contrast Picture Adj.
Picture H Position Adjust this when the picture is shifted to the left or right. Select the "H Position" item name and adjust with the cursor ( ) buttons. V Position Adjust this when the picture is shifted up or down. Select the "V Position" item name and adjust with the cursor ( ) buttons. Reset This function resets (i.e., returns to the standard settings) the adjustment/setting value of the "Image" menu name. A press of the cursor ( ) button forces the reset.
Color ● Select the menu name "Color". See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations. The item name display will differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Pages E-44 and E-45. Gamma Gamma corrects the proportion of change of the dark portions from the bright portions of the input signal.
Color Color System This function sets the color system of the video signal. Normally, this should be set to Auto. Set this function when the system cannot be identified with Auto. Select item name "Color System" and select the setting contents with the cursor ( ) buttons. Auto ............ NTSC .......... PAL ............. SECAM ....... Automatic identification Fixes the setting to NTSC Fixes the setting to PAL Fixes the setting to SECAM Gamma Normal Color Temp.
View ● Perform this operation while projecting the picture for which the adjustment/setting will be made. ● Select the menu name "View". See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations. The item name display will differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Pages E-44 and E-45. Aspect This function sets the horizontal and vertical picture proportions of the input signal.
View Filter This function sets the sharpness when the input signal is adjusted to the resolution of the projector and enlarged or reduced. Select the item name "Filter" and select the setting contents with the cursor ( ) buttons. Aspect Auto Filter 3 Projection Smaller numerical values result in a sharper picture and larger values result in a softer picture. Please select your desired setting value.
View Keystone This function corrects the keystone distortion of the projected picture on the screen. Adjust so that the edges are parallel in the vertical and the horizontal directions. 1. Select item name "Keystone" and press the cursor ( ) button. The sub menu will open. Auto Aspect 3 Filter Projection Keystone 2. Select "V Keystone" or "H Keystone" with the cursor (▲▼) buttons and adjust with the cursor ( ) buttons (or with the main unit ( ) button).
View Keystone Save This function is used to save the keystone adjustment values. Setting Keystone Save to on will set the previous keystone adjustment values when projecting after the power cable has been disconnected and then reconnected. 1. Select item name "Keystone" and press the cursor ( ) button. The sub menu will open. Aspect Auto Filter 3 Projection 2. Select "Keystone Save" with the cursor (▲▼) buttons and set with the cursor ( ) buttons (or with the main unit ( ) button).
Setup ● Select menu name "Setup". See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations. The item name display will differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Pages E-44 and E-45. Language This function sets the language that is displayed on screen in the messages and menu displays. 1. Select item name "Language" and press the cursor ( ) button. The selection display will open.
Setup Auto Power Off This function switches off the projector power automatically when the input of the projector enters a no-signal condition. Select item name "Auto Power Off" and select the setting contents with the cursor ( ) buttons. Language Auto Source On Auto Power Off Off On Screen On Menu Position YPbPr On ............... The power is switched off when there is no signal. Off .............. The power is not switch off even when there is no signal.
Setup Menu Position This function sets the display position of the menu. Language Auto Source Select item name "Menu Position" and select the setting contents with the cursor ( ) buttons. On Auto Power Off Off On Screen On Menu Position .............. Displays on the left side .............. Displays on the right side YPbPr Background Disable Black YPbPr This setting causes the projector not to accept component YPbPr signals.
Setup White Balance This function automatically adjusts the black level and the white level of the analog RGB input signal so that they suit the personal computer. This serves to improve color reproducibility. Language Auto Source On Auto Power Off Off On Screen On Menu Position 1. Select item name "White Balance" and press the cursor ( ) button. The display changes to the "Input Black Signal" display. YPbPr Disable Background Black White Balance 2.
Info. ● Select menu name "Info.". See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations. The item name display will differ depending on the input signal. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Pages E-44 and E-45. Status This displays information about the equipment. Select item name "Status" and press the cursor ( ) Status button.
Info. Resolution / Frequency This function displays the resolution and frequency of the detected input signal. Status Factory Default Lamp Timer Reset This information will not be displayed unless an analog RGB or digital RGB signal is input and an Analog RGB or Digital RGB input selection is made. Resolution 1024 768 Frequency 60Hz, 48kHz Lamp Timer 12h Lamp Timer This function displays the lamp timer. When the lamp timer exceeds 1,000 hours, "Replace the Lamp Cartridge.
When the STATUS Indicator is Lit/Flashes STATUS indicator POWER indicator TU TA S S W O P When the STATUS indicator of the main unit operation panel is lit or flashes, notification is being given of the irregularities described. R E P O W E M R E N U E C R U O S A U TO K IC U U Q EN M AU DIO VID EO STATUS Indicator STATUS Flashes red (0.5 s lit / 0.5 s off) STATUS Flashes red (1 s lit / 1 s off) STATUS Flashes red (0.5 s lit / 0.
When the STATUS Indicator is Lit/Flashes STATUS Indicator POWER Indicator STATUS POWER Lit red It is timer to replace the lamp. The lamp timer has exceeded 1,000 hours. Replace the lamp cartridge. When power is on: Lit green When power is off: Lit amber STATUS Lit red Action to Take POWER The lamp's service life has ended. The lamp timer has exceeded 1,100 hours. The lamp will not light. Replace the lamp cartridge.
Troubleshooting Check the following matters before requesting servicing. Problem Reference Page Check * Has the power plug become disconnected from the outlet? * Is the lamp cover properly attached? * Has the internal temperature become high? When the internal temperature becomes very high, to protect the unit the power will not switch on. * Has the lamp timer exceeded 1,100 hours? The power will no longer switch on once the timer has exceeded 1,100 hours.
Troubleshooting Problem Reference Page Check Menu name cannot be selected * Other than for "Setup" and "Info.", selection is not permitted unless a signal is input to the projector and an image or picture is projected. – Pressing the PIP button does not display a sub-picture * There will not be a display unless the personal computer screen is being projected. An image will not be output unless a video image is being input.
Cleaning ● Be certain to disconnect the power plug from the power outlet before cleaning. ● Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecticides. Do not leave rubber or vinyl products in contact with the projector for long periods. Doing so could cause them to undergo qualitative changes or the coatings may peel, etc. Cleaning a Soiled Projector Main Unit * Wipe with a lint-free, soft, dry cloth.
Replacing the Lamp Cartridge The lamp as a light source used in the unit has a lifespan. The rated lamp life is about 1,000 hours. The rated lamp life is the average life of the lamps produced and tested (under the test conditions of our company) for a long term, however, it may become shorter depending on the conditions of usage. After the lamp has been operating for 1000 hours or longer, the STATUS indicator will light and total lamp usage will be displayed on the screen.
Replacing the Lamp Cartridge PREPARATION 1. 2. 3. Turn the projector upside down and place it on a soft cloth that has been prepared in advance to prevent scratches. This will assist in lamp cartridge replacement. After replacement, return the projector to the original condition. Disconnect the power cable. Turn the projector upside down. Remove the lamp cover. (1) Turn the screw that fastens the lamp cover counterclockwise until it turns freely. (The screw will not come out.) 4.
Replacing the Lamp Cartridge 5. Install the new lamp cartridge (1) Slowly push in the lamp cartridge with the socket facing forward. (Align the lamp cartridge screw with the screw hole of the projector.) 6. Install the lamp cover (1) First insert the front edge of the lamp cover into the groove, then close the lamp cover. 7. (2) Turn the 2 screws of the lamp cartridge clockwise to tighten. (2) Turn the screw of the lamp cover clockwise to tighten. Reset the lamp timer to zero.
Specifications Optical DMDTM Lamp Image size Light Output Contrast Ratio Single Chip Digital Micro Device (DMDTM) V-1080: 1024 ⳯ 768 dots V-807: 800 ⳯ 600 dots 120 W high-pressure mercury lamp V-1080: 36 inch to 200 inch V-807: 35 inch to 200 inch 800 ANSI lumens 800:1 (Full on/off) Electrical Inputs Color Reproduction Resolution Input Current Power Requirement Power Consumption Video (NTSC3.58/NTSC4.
Table of Supported Frequency The unit automatically determines PC signals to select the appropriate resolution. Some signals may require manual adjustments. See "Picture Adj./Fine Picture /H Position / V Position" on pages E-47 and E-48.
Cabinet Dimensions QUICK MENU POWER AUTO SOURCE MENU 141 (5.6) STATUS POWER 180 (7.1) 45 (1.
PLUS Industrial Corporation is certified to ISO 9001. Certificate No. Q1001219118017. Otowa Head Office and PLUSLAND of PLUS Corporation and PLUS Industrial Corporation are certified to ISO 14001. Certificate No. NQE-9809008A. * PLUS Vision Corp. is certified to ISO 14001 as a member of the PLUS group.