MSDS

Dalton Enterprise, Inc. Product: Plushtex®
Phone: [phone] MSDS Date: 06/09/2010
Page 4 of 5
Color Black
State Liquid
Odor Slight odor
Boiling Point 100º C (212º F)
Molecular Weight Mixture
Specific Gravity (Water=1) 1.20
Density 8.8lbs/gallon
Vapor Density (Air=1) >1
Solubility in Water Completely (100%)
Percent Volatility 60%
pH 7.5-9.5
Max VOC: Less than 10 g/l
Section XI – TOXICOLOGICAL INFORMATION
This product contains Crystalline Silica (CS) which is considered a hazard by inhalation. The International Association
for Research on Cancer (IARC) has classified CS as probably carcinogenic for humans (Class I). Normal application
procedures pose no hazard since the silica is wet and encapsulated, but grinding or sanding dried films may yield
respirable silica dusts. Control exposures to <0.1mg/ m³ of air using approved dust filter respirators. CS has not been
classified as a carcinogen by OSHA or NTP.
Section XII – ECOLOGICAL INFORMATION
There are no known adverse ecological effects for this product.
Section XIII – DISPOSAL CONSIDERATIONS
Dispose this product in accordance with applicable local, county, state and federal regulations.
Section XIV – TRANSPORT INFORMATION
HAZARD CLASS: NOT REGULATED
SUBSIDIARY HAZARD CLASS: NONE
DOT IDENTIFICATION NUMBER: NONE
DOT SHIPPING LABEL: NONE
Section XV – REGULATORY INFORMATION
This product contains no chemicals subject to the reporting requirements of Section 313 of the Emergency Planning and
Community-Right-To-Know Act of 1986 and of 40 CFR 372.
Section XVI – OTHER INFORMATION
Hazard Rating Systems
NFPA 704* HMIS** Key: 0 - Insignificant;