MSDS
Dalton Enterprise, Inc.
Phone: (203) 272-3221
Product: Plush™ Acrylic Resurfacer
MSDS Date: 6/08/2010
Page 2 of 5
Skin Contact:
Prolonged or repeated skin contact can cause the following:
Due to individual sensitization, this product can cause skin irritation upon prolonged or repeated contact
Ingestion:
Can cause gastrointestinal irritation, nausea, vomiting and diarrhea. Aspiration of material into lungs can cause
chemical pneumonitis, which can be fatal.
Section IV –FIRST AID MEASURES
Inhalation:
If overcome by mist or vapor, remove from exposure immediately; call a physician.
Eye Contact:
Flush eyes with a large amount of water for at least 15 minutes. Consult a physician if irritation persists.
Skin Contact:
Remove contaminated clothing. Wash affected skin areas thoroughly with soap and water. Do not use solvents or
thinner to clean skin. Consult a physician if irritation persists.
Ingestion:
DO NOT INDUCE VOMITING. Drink 2 glasses of water. Consult a physician. Treat symptomatically.
Section V – FIRE FIGHTING MEASURES
Flash Point 212°F/100°C
Auto-ignition Temp Not Established
Lower Explosive Limit Not Applicable
Upper Explosive Limit Not Applicable
Unusual Fire and Explosion Hazards:
Vapors are heavier than air and may travel along the ground or be moved by ventilation and ignited by heat,
pilot lights, other flame and ignition sources at locations distant from the handling point. Never use a welding
or cutting torch on or near container (even empty) because vapors may ignite.
Special Firefighting Procedures:
The use of self-contained breathing apparatus is recommended for fire fighters.
Extinguishing Agents:
Water Spray: OK Carbon Dioxide: OK
Foam: OK Dry Chemical: OK
Halon: OK Other: Any “ABC” Class





