MSDS

Dalton Enterprise, Inc.
Phone: [phone]
Product: Plush™ Acrylic Resurfacer
MSDS Date: 6/08/2010
Page 4 of 5
Incompatibility: (Conditions/Materials to avoid)
High temperatures and strong oxidizers
Hazardous Polymerization:
Will not occur
Hazardous Decomposition Products:
Hydrogen Sulfide, Sulfur Dioxide, Carbon Dioxide, Carbon Monoxide and other unidentified hydrocarbons
Section X – PHYSICAL DATA
Appearance Viscous Liquid
Color Black
State Liquid
Odor Mild odor
Boiling Point N/A
Molecular Weight Mixture
Specific Gravity (Water=1) 1.18
Vapor Density (Air=1) N/A
Solubility in Water Completely (100%)
Percent Volatility 71.21
pH 7.5-9.5
Viscosity N/A
Section XII – TOXICOLOGICAL INFORMATION
This product contains Crystalline Silica (CS) which is considered a hazard by inhalation. The International
Association for Research on Cancer (IRAC) has classified CS as probably carcinogenic for humans (2A). This
classification is based on the findings of laboratory animal studies that were considered sufficient and data from
epidemiological studies that were considered limited for carcinogenicity. CS can also cause silicosis, a
noncancerous lung disease. CS has not been classified as a carcinogen by OSHA or NTP. Pigment dust would
not normally be encountered when handling a packaged paint product containing the pre-wetted pigment.
Proper respiratory protection should be worn when sanding a dried paint film due to the presence of CS.
Section XII – ECOLOGICAL INFORMATION
There are no known adverse ecological effects for this product.
Section XIII – DISPOSAL CONSIDERATIONS
The coating and any contaminated diking material should be thoroughly air dried and collected into drums. Dispose in
accordance with federal, state and local regulations.
Section XIV – TRANSPORT INFORMATION
HAZARD CLASS: NOT REGULATED