MSDS

Dalton Enterprises, Inc.
Phone: [phone]
Product: Plushcolor™
MSDS Date: 08/08/13
Page 2 of 5
Skin Contact:
Prolonged or repeated skin contact can cause the following:
Mild irritation
Section IV –FIRST AID MEASURES
Inhalation:
Move subject to fresh air.
Eye Contact:
Flush eyes with a large amount of water for at least 15 minutes. Consult a physician if irritation persists.
Skin Contact:
Remove contaminated clothing. Wash affected skin areas thoroughly with soap and water. Consult a physician if
irritation persists.
Ingestion:
If swallowed, give 2 glasses of water to drink. DO NOT INDUCE VOMITING. Consult a physician. Never give
anything by mouth to an unconscious person.
Section V – FIRE FIGHTING MEASURES
Flash Point Not Flammable
Auto-ignition Temp Not Applicable
Lower Explosive Limit Not Applicable
Upper Explosive Limit Not Applicable
Special Firefighting Procedures:
Wear self-contained breathing apparatus and full protective gear.
Extinguishing Agents:
Water Spray: OK Carbon Dioxide: OK
Foam: OK Dry Chemical: OK
Halon: OK Other: Any “ABC” class
Section VI – ACCIDENTAL RELEASE MEASURES
Steps to be Taken in Case Material is Released or Spilled:
Minimize contact with the skin, eyes, and do not take internally. Ventilate confined spaces. Keep unnecessary
people away. Dike and contain spill with inert material (e.g. sand, earth). Transfer liquids and contaminated
diking material to separate, and suitable, containers for recovery or disposal.
Caution:
Keep spills and cleaning runoff out of municipal sewers and open bodies of water.
Waste Disposal Method:
Dispose of in accordance with local, state and federal regulations.