Instructions

68
Watermark
Switch on or off the Watermark function. Switch on this function to add watermark
on the scanned images.
You must first set the relevant settings under System Settings -->Scan Settings -
-> Initial Settings and switch on the Watermark function "HERE".
Punch Hole Removal
Switch on or off the Punch Hole Removal function. Switch on this function to
remove the hole marks aligned along with the edge of the scanned document.
Blank Page Removal
Switch on or off the Blank Page Removal function. Switch on this function to
remove blank pages after the document is scanned.
Adjust the Sensitivity level in the Sensitivity dialog. The higher the sensitivity, the
more scanned pages will be treated as blank pages and removed.
Blank Page Split
Switch on or off the Blank Page Split function. Switch on this function to split the
scanned documents by inserting a blank page in between the files. This function can
only be used with the Multi-Page PDF and Multi-Page TIFF formats.
Double Feed Detection
Switch on or off the Double Feed Detection function. Switch on this function to
check paper overlap (i.e., 2 or more pages stuck together when being fed through the
ADF).