Instructions

Unpack and Assemble
5
1
2
3
4
* Pad module may vary upon
scanner model.
1
2
Paper
Chute
Cover
Panel
Release
Button
Install the paper chute by opening
the upper panel unit and remove
all packing materials.
Save to PC/Mobile
1. Select the receiver/device.
2. Tap
to send.
Note: Scanner and the receiving
device must be on the same
network subnet.
Save to PC
Download and install eScan
Client software, Windows and
Mac, from System Settings >
Downloads > Client Application
via USB.
Save to Mobile
Download and install Plustek
eScan app from Apple App Store
/ Google Play Store.
Connecting the eScan
Connecting with Ethernet
(RJ45) cable.
1
4
5
PWRPC SEND SVNCRECV READY VOIP LINE1LINE2
INTERNET
2
3
2
3
6
To setup wireless connection, tap
System Settings > General >
Wi-Fi to enable.
Save to FTP / SMB (Network)
1. Enter IP address and
credentials. Or select a server
from the list on the bottom of
the screen.
2. Tap
/ to connect.
3. Select desired destination path.
4. Tap / to send the scanned
documents.
5. Tap / to exit.
Browse “Quick Connect”/ “ ” tab
for history and quickly connect.
Note: When saving to an SMB
network share, the shared folder
must be accessible to the eScan,
on the same network subnet.
Scanning a Document
1. Load documents in scanner
A
Set the documents
face-down and top first.
2. Scan
Tap buttons to
toggle and make adjustments as
needed.
Tap
button to scan.
3. Preview
Select images to delete and rotate.
To edit, double tap on the scanned
image.
Tap button to insert new
scanned image.
Tap
button to select all the
scanned images.
4. Save to USB
Tap on the USB button to save
the scanned document to the
USB ash drive.
Note: It is advised to wait for
3-5 seconds once the saving
process is completed, then
remove the USB ash drive.
Plustek eScan
Quick Start Guide
3
1
4
2
5
Video Tutorials
Note: Please make sure internet access is available for eScan to
retrieve date and time.
To change time zone, tap System Settings >
General > About
>
Date & time
Setup Mail Server
Setup mail server prior to scan
and Save to Mail.
1. Tap on System Settings
2. Tap Sending Settings >
enable Mail.
3. Tap on Set. 4. Enter your credentials
* eScan supports SMTP and
Microsoft Exchange Server.
* To use Exchange Server, tap
and check the Exchange box
at the top of the menu.
Save to Mail
Enter the sender and recipients’ email
address
(you can also create and lookup from the
address book)
Note: Separate multiple email addresses
with ",".
Tap
to send.
Job button (Single Touch Scanning)
You can create dedicated single
touch scanning job buttons
by tapping Assign as new job
button on the Sending success
page.
Tap button on the upper-
right corner to display job button
menu.
Save to clouds
Note: Please make sure there is an active Internet connection while using the scanner.
Technical Support
USA/CA United Kingdom
714-670-7713 0125-674-1513
9am to 5:30pm, Pacic Time, Monday through Friday 9am-16pm, Monday through Friday
[e-mail] [e-mail]
* Specications and interfaces are subject to change without notice. Please refer to Plustek corporate website for more info.
6 6.1
8
7
1. Select cloud storage (e.g. Google Drive) Tap
the button to login.
2. Enter your credentials.
* Due to the security of each individual server,
you may want to adjust the security level if
you are experiencing issues.
3. Tap the to connect.
4. Tap the to select the desired destination
path
5. Tap to send.
Tap on the desired job button to scan documents with the
preset congurations.
P/NO.: 17-07-2A15620-C
© 2018 by . All rights reserved. All registered trademarks are the property of their respective owners.