User's Manual

9
9. Follow the on-screen instructions to install all software that your new USB scanner
requires. If the pop-up wizard window appears click Next, and click Install this
driver software anyway in the Windows Security window then click Finish in the
wizard window.
10. After the software is installed, close all open applications and click on the Finish
button to restart your computer.
Attention
Save the Setup/Application DVD in case you
need to reinstall the driver and software in the
future.
S
S
t
t
e
e
p
p
4
4
.
.
T
T
e
e
s
s
t
t
i
i
n
n
g
g
t
t
h
h
e
e
S
S
c
c
a
a
n
n
n
n
e
e
r
r
The following describes how you can check if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Open the scanner’s document cover and place a book, head toward the
scanner button panel, on the scanner glass.
2. Gently close the document cover.
3. Double-click the icon
in the Windows system tray.
4. Within the “Book Pavilion” window, you may adjust the scan settings by
clicking Mode Setting. Also, you can configure the save settings of the
scanned images.
5. Press the Color, Gray or B/W button on the scanner panel.
6. The scanner starts to scan immediately and carry out the corresponding
action according to the settings you have set up in the Book Pavilion window.