Owners manual

9
CHAPTER I. INSTALLING THE SCANNER
Before installing your scanner, please verify that you have all of the proper
components. A list of the package contents is provided in the “Box Contents” section of
this guide.
SOFTWARE INSTALLATION REQUIREMENTS
Your scanner comes with the OCR software (ABBYY FineReader Sprint), business
card recognition software (NewSoft Presto! BizCard), document management software
(NewSoft Presto! PageManager), the scanner’s driver, ISIS driver
4
and DocAction. All
of these software applications use approximately 400 megabytes of hard disk space
after they are installed into your computer. To ensure ample room for the installation,
as well as for scanning and saving images, a minimum of 1 GB of hard disk space is
recommended.
This USB scanner can only operate under the Microsoft Windows 2000
Professional / XP / Vista / 7 / 8 operating system.
HARDWARE REQUIREMENTS
This scanner connects to your computer through the Universal Serial Bus (USB)
which supports HOT PLUG AND PLAY. To determine whether your computer is USB-
capable, you must check the rear of your PC to locate a USB jack that looks like the
picture below. If you are having trouble in locating the USB port on your computer,
please refer to the hardware manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which usually
appear as shown below.
4
. If the ISIS driver is
installed, you can scan from applications that use the ISIS driver.
USB Connector(s)