User Manual

Button Configuration Window Overview 51
When you scan by the
Color Mode
, clicking
button would allow you to choose the
desired color to remove the punch hole marks.
When you scan by the
Grayscale Mode
, clicking
button would allow you to
choose the desired color to remove the punch hole marks.
When you scan by the
B
/
W Mode
, punch hole marks will be filled with white color if
you click
button, or punch hole marks will be filled with black color if you click
button.
Scan continuously
You may adjust the time interval by clicking
buttons.
Split
You may set the number by clicking the up or down arrows to split an image into
several equal parts.
Each equal part can be saved as an image.
Enable specify split sequence
Tick this check box to specify the image output order of each equal part.
Specify split sequence
Select the options to specify the image output order. You can specify the horizontal
and vertical output orders of images scanned in simplex mode. The numbers in the
illustration figure show the current image output order of each equal part. To
configure the desired output order, clicking on the number to clear the existing
output order, and then clicking on each equal part to specify the output order.
Prompt dialog to show high resolution and large size scan reminder
Tick this check box to show a warning dialog when users scan high resolution and
large size documents.
Preview
By clicking on the Preview button, you can scan the source document into the
preview window within DocAction interface. Documents or images that are