User Manual

Using the Scanner Buttons 61
·
If you want to simply start up an application without doing any scan (i.e.,
make this Scan button as a hot key to launch a specified application):
Tick the check box of "Launch only". You may select any application
program installed in your computer.
4.
Click
to configure Saving Folder and file naming format in the
Save Setup
window.
5.
Check the
scan settings
and make any required changes.
6.
After all settings are done, click
to accept the settings and exit this
Button Configuration window, or click
to save what you have
configured and continue adjusting other settings, or click
to abort
your adjustments and exit this window.
Also see:
Scan Button Settings
3.1.6.1
Add, modify or delete the application
To add an application
If the desired program is not found in the drop-down menu of Application, you may
add it by following the steps described below:
1.
Click
to open the "Add/Remove Linked Application" window.
2.
Click
and an Open dialog box appears. Browse to the desired program
folder and select the executable file (*.exe) of the desired application program,
and then click
Open
.
3.
The
full file path and execution file name of the application are displayed in the
Application field in Button Configuration window.