User Manual

15
functions. They are especially useful when you need to repeatedly scan with the same
settings and send images to the same destination.
Buttons on the scanner panel will be used in this guide to demonstrate the scanner
operations. You may also use MacAction's on-screen Execute menu to perform the
same scanning tasks.
Configure Button Settings
Before performing your first scan via scanner buttons, you are recommended to
configure the button settings to your needs and preferences first. There are three ways
to configure or view the button settings of MacAction:
 Double-click the icon
in Finder > Applications > Plustek > Your
scanner model name.
 Click the icon
in the Dock.
 Right-click the icon
in the Dock, and then choose Button
Configuration in the pop-up menu that opens.
Within the “Button Configuration” window, you can find a row of icons running
through the left side of the window. Each icon corresponds to a button on your
scanner's panel (as well as MacAction's on-screen Execute menu). Clicking any icon
on the left pane and its current button settings are displayed immediately on the right
pane. You may adjust the settings as desired.
Click the Help button within the Button Configuration window for more information
about the settings.
Scan from the Buttons
Scanning documents or images from this scanner is very easy. Follow the two
steps described below:
1. Place the document or images onto the scanner. (Refer to “
Chapter II.
Scanning” of this guide for more information in placing paper on the flatbed
glass properly.)
Attention
Place only text documents for OCR purposes. Do
not scan a photo using the OCR button.
2. Do one of the following to start scanning:
 Press the button from the scanner's panel.
 Right-click the icon
in the Dock, and then choose Execute in the pop-
up menu that opens. Click the desired button function item in the pop-up