User Manual

Introduction 3
All rights are reserved.
1
Introduction
The MacAction program,
seamlessly integrat
ing
the operation of your scanner with
your
computer and other peripherals, provides a quick and convenient way to
perform various scanning functions.
With MacAction, you don't need to adjust settings every time you scan. Simply
press any button on the scanner's panel or click any scanning menu item of
MacAction on the screen. The scanner starts to scan your paper documents and
transfer them to your assigned destination. The destination can be a printer, your
e-mail program, files on your disk drives, an image-editing program, etc. For
example, if you want a printout copy of a purchase order, you may do that in only
two steps:
Step 1: Place the paper on the scanner.
Step 2: Press the Copy button on the scanner.
The scanner starts scanning instantly and then sends the image directly to your
printer.
Mac
Action makes this integration and convenience possible at your fingertips.
When
Mac
Action is on, you will see the icon
in the Dock. Right-click on this
icon will open a pop-up menu
and allow you to:
·
Configure button settings
.
The settings for each single-touch button on the
scanner's panel are configured through
Mac
Action.
·
Perform predefined scanning tasks in the same way as you press a button on the
scanner panel.
·
Access
Scanner Utility
where you may set up the standby mode and adjust the
initial scanning position
.
(This function may or may not be available depending
on the scanner model you purchase.)
We will guide you through
how to configure button settings and how to use scanner
buttons to carry out your different scanning tasks.
1.1
Operate the Scanner