Manualshelf

User Manual

ManualsBrandsPlustek ManualsFlatbed & Photo ScannersOpticPro - A3 CCD Graphic Flatbed Scanner, 1600 dpi Resolution with Dual Light Design. Suitable for Graphic Design, Artwork and Artists. Support Mac, Windows, Twain and ICA
12345678910
3
4. Damaged wire could cause fire or electrical shock. Keep the power cord straight
and without being twisted, bended, or scraped.
5. Unplug this device if you don’t need to use it for a certain period of time, such as,
during night or long weekend, to avoid any risks of causing fire.
6. Do not attempt to disassemble the scanner. There is danger of an electrical shock
and opening your scanner will void your warranty.
7. Be sure not to bump or knock the scanner glass as it is fragile and could break.
8. Do not subject the scanner to excessive vibration. It may damage the internal
components.
MINIMUM SYSTEM REQUIREMENTS
1
PC with Intel Core i5 processor or higher
4 GB RAM or higher (For maximum A3 size@1600 dpi scanning, allocated 20 GB
Virtual Memory at least.)
Available USB 2.0 port
DVD-ROM Drive
800 MB Free Hard Disk Space
Video card that supports 16-bit color or greater
Operating System: Windows 7 / 8 / 10
1
Higher requirements might be needed when scanning or editing a large quantity of image data.
The system requirements here are only a guideline, as in general the better the computer
(motherboard, processor, hard disk, RAM, video graphic card), the better the results.