Operation Manual

If the Windows system starts and detects the scanner unconnected, the following
message will appear to remind you:
If you prefer not to see this reminder message again, you may:
 Check the box of [Do not show this message again] within this message
window, and then click [OK] button.
 Click on the QuickScan icon located on the Windows system tray.
Uncheck [Enable Warning] from the menu that pops up. Click the [No]
button in the message box that appears.
Attention
If you would like to be prompted with this message again,
you may click on the QuickScan icon and check
[Enable Warning] from the menu that pops up. Click the
[Yes] button in the message box that appears.
Power Save
To save power consumption, the scanner light source always automatically turns
itself off after the scanning process is finished.
20